Operating Instructions and Installation Instructions

Problem solving guide
108
Problem Cause and remedy
The sensor controls do
not respond.
You have selected theDisplay| QuickTouch| Off setting.
When the oven is switched off, the sensor controls do
not respond.
 As soon as the oven is switched on, the sensor
controls will respond. If you want the sensor
controls to respond even when the oven is
switched off, select the Display| QuickTouch| On
setting.
The oven is not connected to the power supply.
 Check that the oven plug is correctly inserted into
the socket and switched on.
 Check whether the fuse has tripped. Contact a
qualified electrician or the Miele Customer Service
Department.
There is a fault with the controls.
 Touch and hold the On/Off button until the
display switches off and the oven restarts.
Press OK for 6 seconds to
unlock appears in the
display when the oven
is switched on.
The system lock has been activated.
 You can deactivate the system lock for a
programme by touching the OKsensor control for
at least 6seconds.
 If you want to permanently deactivate the system
lock, select theSafety| System lock | Off setting.
Power cut -process
cancelled appears in the
display.
There has been a brief power cut. This has caused
the current cooking programme to stop.
 Switch the oven off and then back on again.
 Restart the cooking programme.
12:00 appears in the
display.
The power supply was interrupted for longer than
150hours.
 Reset the time and date.
Maximum operating hoiurs
reached appears in the
display.
The oven has been operating for an unusually long
time. This has triggered the safety switch-off function.
 Confirm withOK.
The oven is now ready to use.