Operating Instructions and Installation Instructions

Operation
58
Pre-heat
It is only necessary to pre-heat the oven
compartment in a few instances.
You can place most dishes in the cold
oven compartment to make use of the
heat produced during the heating-up
phase.
If you have set a cooking duration, it
will only start to count down when the
desired temperature is reached and
you have placed the food in the oven.
Start the cooking programme
immediately without delaying the start
time.
Switching onPre-heat
The Pre-heatfunction can be used with
any operating mode and has to be
switched on separately for each
cooking programme.
Example: you have selected a function
and the required settings such as the
temperature.
You want to switch on the Pre-
heatfunction for this cooking
programme.
 Select the sensor control.
 SelectPre-heat| On.
 Confirm withOK.
The following message is displayed
with a time: Place food in the oven at. The
oven compartment is heated to the set
temperature.
 As soon as you are prompted to do
so, place the food in the oven
compartment.
 Confirm withOK.