Operating Instructions and Installation Instructions

Problem solving guide
114
Problem Cause and remedy
FaultF32 appears in
the display.
The door lock for pyrolytic cleaning has not locked.
 Switch the oven off and then back on again. Start
the pyrolytic cleaning programme again.
 If the message appears again, contact the Miele
Customer Service Department.
FaultF33 appears in
the display.
The door lock for pyrolytic cleaning has not opened.
 Switch the oven off and then back on again.
 If the door lock still does not deactivate itself,
contact the Miele Customer Service Department.
Faultand a fault code
not listed here appears
in the display.
A fault has occurred that you cannot resolve.
 Call the Miele Customer Service Department.
No signal to food probe.
Reposition food probe in the
oven. appears in the
display.
The food probe is not being recognised.
 Change the position of the food probe in the food.
If the food probe is still not being recognised, it is
faulty. You can purchase a new food probe from your
Miele dealer or from the Miele Customer Service
Department.
Function currently not
available appears in the
display after selecting
the Descale function.
The steam injection system is faulty.
 Call the Miele Customer Service Department.
Fault with moisture control
the automatic programmes
will run without moisture
appears in the display
after selecting an
automatic programme.
The steam injection system is faulty.
 Call the Miele Customer Service Department.
Automatic programmes can be run without using
moisture assistance.
Programmes using
moisture assistance are
not taking in water.
Demo mode is active. You can select menu options in
the display and the sensor controls, but the steam
injection system pump will not work.
 Deactivate demo mode by selecting Settings|
Showroom programme| Demo mode| Off.
The pump for the steam injection system is faulty.
 Call the Miele Customer Service Department.