Operating Instructions and Installation Instructions
Settings
43
Units
Temperature
You can set the temperature in degrees
Celsius (°C) or degrees Fahrenheit (°F).
Booster
The Boosterfunction is used to quickly
pre-heat the oven compartment.
– On
The Boosterfunction is automatically
switched on during the heating-up
phase of a cooking programme. The
top heat/grill element, ring heating
element and hot air fan pre-heat the
oven compartment to the desired
temperature at the same time.
– Off
The Boosterfunction is switched off
during the heating-up phase of a
cooking programme. Only the heating
elements associated with the
function are pre-heating the oven
compartment.
You can also use the pull-down menu
to switch the Boosterfunction on or off
for a cooking programme.
Rapid cooling
Using the Rapid cooling function you can
quickly cool down food and the oven
compartment once the cooking process
is brought to an end.
This function is useful if, for example,
you then immediately want to start an
automatic programme for which the
oven compartment needs to be cold.
Using the Keeping warm function you
can keep food warm after cooking
without inadvertently cooking it further.
– On
The Rapid coolingfunction is switched
on. Once the cooking programme is
brought to an end, the door opens a
little automatically. The cooling fan
cools the food and the oven
compartment quickly.
– Off
The Rapid coolingfunction is switched
off. Once the cooking process is
brought to an end, the door remains
closed. The cooling fan cools the
food and the oven compartment.
You can also use the pull-down menu
to switch the Rapid coolingfunction on
or off for a cooking programme.
If your oven is installed behind a closed
furniture door, follow the instructions in
“Settings” – “Furniture front
recognition”.