Operation Manual

Problem Possible cause and remedy
The door cannot be
opened at the end of a
Pyrolytic cleaning
programme.
The door lock for the Pyrolytic cleaning programme is
not being released.
^
Turn the function selector to the 0 position.
If this does not release the door lock please call the
Miele Service Department.
There is soiling in the
oven after the Pyrolytic
cleaning programme.
The Pyrolytic cleaning programme burns off soiling in
the oven and leaves it as ash.
^
Remove the ash using a damp microfibre cloth or with
clean sponge and a solution of hot water and
washing-up liquid.
^
If there is still coarse soiling left in the oven after the
Pyrolytic cleaning programme you should start the
programme again, selecting a longer duration.
F32appears in the
display.
The Pyrolytic cleaning programme door lock is not
locking.
^ Turn the function selector to the 0 position and select
a Pyrolytic cleaning programme again.
If the fault code appears again call the Miele Service
Department.
F33appears in the
display.
The door lock for the Pyrolytic cleaning programme is
not being released.
^
Turn the function selector to the 0 position.
If the door lock still does not release itself call the
Miele Service Department.
Fxxappears in the
display.
There is a problem that you cannot resolve.
^
Call the Miele Service Department.
Problem solving guide
89