Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Overview
- Oven controls
- Features
- Data plate
- Scope of delivery
- Standard and optional accessories
- Side racks
- Universal tray and Wire Rack with anti-tip safety notches
- FlexiClips with Wire Rack HFCBBR 30-3
- Installing and removing the FlexiClips with Wire Rack
- Perforated Gourmet Baking Tray HBBL 71
- Round baking pans
- Broiling and roasting insert HGBB 30-1
- HUB Gourmet Casserole Dishes HBD Gourmet Casserole Dish lids
- Accessories for cleaning and care
- Safety features
- PerfectClean treated surfaces
- Before first use
- Overview of operating modes
- Energy-saving tips
- Using the oven
- Simple operation
- Preheating the oven
- Operating the clock/timer
- Switching cooking programs on and off automatically
- Setting the cooking duration
- Setting a cooking duration and a finish time
- First set the cooking duration:
- Then set the finish time:
- At the end of the cooking duration:
- Changing the cooking duration
- Deleting a cooking duration
- Deleting a finish time
- Changing the time of day
- Changing factory default settings
- Settings overview
- Switching the system lock on and off
- Activating the system lock
- Deactivating the system lock for a cooking process
- Deactivating the system lock
- Using the timer
- Setting the timer
- Changing the timer
- Deleting the timer
- Baking
- Roasting
- Broiling
- Further applications
- Cleaning and care of the oven
- Frequently Asked Questions
- Customer Service
- Caring for the environment
- Installation
Cleaning and care of the oven
52
If you want to see how the Self Clean
program is progressing, you need to
highlight the duration symbol in the
display.
Select OK.
If necessary, use or to move the
triangle until it appears under .
The time left for the Self Clean program
will start counting down on the display.
You cannot alter the duration.
You can use the timer while the Self
Clean program is running. When the
set time has elapsed, the audible
signal will sound and will flash. The
time will then continue to increase on
the display. The audible signal will
stop and the symbols in the display
will go out as soon as you confirm
with OK. and the number of the
selected Self Clean program will
appear again.
Starting Self Clean at a later time
Start the Self Clean program as
described above and then set the
required finish time within the first five
minutes of starting the program.
Select OK.
Move the triangle with or until
it appears under .
appears.
Confirm with OK.
The display will show the finish time
calculated from the current time of day
plus the duration of the selected Self
Clean program.
Set the desired finish time using or
.
Confirm with OK.
The finish time is now saved.
The oven heating switches off.
The finish time can be changed at any
time up until the start time for the
program.
As soon as the start time is reached,
the oven heating and the cooling fan
will switch on. The duration will appear
in the display.
At the end of the Self Clean program
h
, , and will appear in the
display.
As long as lights up, the door is
locked. When flashes, the door is
unlocked.
When the door lock has been
deactivated:
- goes out.
- flashes.
- Short signals will sound if the audible
signal is switched on.
Turn the mode selector toOff.
The audible signal will stop and the
symbols on the display will go out.