Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Overview
- Oven controls
- Features
- Data plate
- Scope of delivery
- Standard and optional accessories
- Side racks
- Universal tray and Wire Rack with anti-tip safety notches
- FlexiClips with Wire Rack HFCBBR 30-3
- Installing and removing the FlexiClips with Wire Rack
- Perforated Gourmet Baking Tray HBBL 71
- Round baking pans
- Broiling and roasting insert HGBB 30-1
- HUB Gourmet Casserole Dishes HBD Gourmet Casserole Dish lids
- Accessories for cleaning and care
- Safety features
- PerfectClean treated surfaces
- Before first use
- Overview of operating modes
- Energy-saving tips
- Using the oven
- Simple operation
- Preheating the oven
- Operating the clock/timer
- Switching cooking programs on and off automatically
- Setting the cooking duration
- Setting a cooking duration and a finish time
- First set the cooking duration:
- Then set the finish time:
- At the end of the cooking duration:
- Changing the cooking duration
- Deleting a cooking duration
- Deleting a finish time
- Changing the time of day
- Changing factory default settings
- Settings overview
- Switching the system lock on and off
- Activating the system lock
- Deactivating the system lock for a cooking process
- Deactivating the system lock
- Using the timer
- Setting the timer
- Changing the timer
- Deleting the timer
- Baking
- Roasting
- Broiling
- Further applications
- Cleaning and care of the oven
- Frequently Asked Questions
- Customer Service
- Caring for the environment
- Installation
Installation
*INSTALLATION*
66
Installing and removing the
oven
For safety reasons, only use the oven
when it has been fully installed.
The oven requires a sufficient supply
of cool air for efficient operation. The
required supply of cool air must not
be excessively heated by other heat
sources (e.g., wood burning stoves).
The following must be observed
when installing the appliance:
Make sure that the shelf that the
oven sits on does not touch the wall.
Do not install heat insulation strips
on the side walls of the cabinet
carcase.
Securing the oven in the housing unit
Connect the oven to the power
supply.
Do not carry the oven by the door
handle. This could damage the door.
Use the carry handles on the side of
the housing to lift the appliance.
It is a good idea to remove the door
(see “Cleaning and care – Removing
the door”) and the accessories before
installing the oven. The oven is then
easier to push into the housing unit
and you do not run the risk of lifting it
by the door handle.
Push the oven into the housing unit
far enough for you to be able to
remove the carry handles.
Remove the carry handles (1.).
Keep the carry handles in case the
oven needs to be moved again in the
future.
Push the oven all the way into the
housing unit and align it in the center
of the unit (2.).
Open the door if you have not
removed it.
1.
2.