Operation Manual

Start the Pyrolytic cleaning
programme
,
Danger of burning
The oven door gets much hotter
during pyrolytic operation than
during normal use.
Make sure children cannot touch the
oven whilst a Pyrolytic cleaning
programme is running.
^
Select Pyrolytic cleaning ^.
PY i
PY I appears in the display. The
number flashes.
Use the rotary dial VWto select
between PY I, PY 2 and PY 3.
^ Select the level required.
^
Touch the OK sensor.
The Pyrolytic cleaning programme will
now start.
0 will also appear in the display.
PY i
0
0 will flash until the door locks.
The oven heating and the cooling fan
will then switch on automatically.
The oven lighting will not come on
during the pyrolytic cleaning
programme.
If you want to see how the Pyrolytic
cleaning programme is progressing
you need to highlight the duration
symbol T in the display.
^
Touch X.
^
If necessary, use the rotary selector
VWto move triangle V until it
appears under T.
The time remaining for the Pyrolytic
cleaning programme will appear in the
display. You cannot alter the duration.
You can use the minute minder at the
same time as running the cleaning
programme. At the end of the minute
minder time the buzzer will sound and
the l symbol will start flashing. The
time will then continue to increase in the
display.
The acoustic and visual signals will go
out when you press OK.
PY and the number indicating the
selected Pyrolytic cleaning programme
will then reappear in the display.
Cleaning and care
89