Operation Manual

If the Pyrolytic cleaning programme
is cancelled
If the Pyrolytic cleaning programme
is cancelled the oven door will remain
locked until the temperature inside
the oven drops to below 280 °C. The
0 symbol will light up until the
temperature has dropped below this
level.
The door can be opened as soon as
the 0 symbol starts flashing.
The following will cause the pyrolytic
programme to stop:
– Turning the function selector to ß.
Once the door has been unlocked, 0
will go out and the time of day will
reappear in the display. If necessary
start the pyrolytic programme ^
again.
– Turning the function selector to a
different function.
PY and 0 will appear in the display.
Once the door has been unlocked, 0
will go out and PY will start to flash.
–
A power cut.
PY and 0 will appear in the display.
Once the door has been unlocked, 0
will go out and PY will start to flash.
When power is restored PY will light
up until the temperature in the oven
has dropped below 280 °C. 0 will
then appear in the display.
The door lock releases. 0 goes out
and the time of day reappears.
Cleaning and care
92