Operating and Installation Instructions

Table Of Contents
Operation
42
Turn the oven on.
The main menu will appear.
Place the food in the oven.
Select the operating mode you want
to use.
The operating mode will appear first,
followed by the recommended
temperature.
Adjust the recommended
temperature, if necessary.
Otherwise, the recommended
temperature will be accepted within a
few seconds. You can change the
temperature later via the arrow
buttons.
Confirm with OK.
The actual temperature will appear and
the preheating phase will begin.
You will see the temperature rising on
the display. An audible signal will sound
when the set temperature is reached for
the first time.
After cooking, select the sensor
button for the selected operating
mode to end the cooking program.
Take the food out of the oven.
Turn the oven off.
Changing values and settings
for a cooking program
Depending on the operating mode, as
soon as a cooking program is in
progress, you can change the values or
settings for this program.
Depending on the operating mode, you
can change the following settings:
- Temperature
- Duration
- Finish at
- Start at
Changing the temperature
You can permanently reset the
recommended temperature to suit
your cooking preferences by selecting
More| Settings| Recommended
temps..
Select the or arrow buttons or
swipe to the right or left in the 
area.
The desired temperature appears in the
display.
Change the desired temperature via
the navigation area.
The temperature changes in 5° steps.
Confirm with OK.
The cooking program will restart with
the new desired temperature.