Operating and Installation Instructions

Table Of Contents
Operation
43
Setting additional durations
Cooking results can be adversely
affected if there is a long delay
between the food being placed in the
oven and the start of cooking. Fresh
food can change color and even spoil.
When baking, the cake mixture or
dough can dry out, and the raising
agents can lose their effectiveness.
Select as short a time as possible
until the start of the cooking process.
You have placed the food in the oven,
selected a mode and the required
settings such as the temperature.
By entering Duration, Finish at, or Start at
via the sensor button, you can
automatically turn the cooking program
off or on and off.
- Duration
Enter the required cooking duration
for the food. The oven heating will
turn off automatically once the
cooking duration has elapsed. The
maximum cooking duration that can
be set depends on the mode that you
have selected.
-
Finish at
Specify when you want the cooking
program to finish. The oven will turn
off automatically at the time you have
set.
-
Start at
This function will only appear in the
menu if you have set a Duration or
Finish at time. With Start at, you have to
specify when you want the cooking
program to start. The oven will turn on
automatically at the time you have set.
Select the sensor button.
Set the required times.
Confirm with OK.
Touch the sensor button to return
to the menu of the selected mode.
Changing set durations
Select the sensor button.
Select the time you want.
Confirm with OK.
Select Change.
Change the set time.
Confirm with OK.
Touch the sensor button to return
to the menu of the selected operating
mode.
These settings will be deleted in the
event of a power failure.
Deleting the set cooking durations
Select the sensor button.
Select the time you want.
Confirm with OK.
Select Delete.
Confirm with OK.
Touch the sensor button to return
to the menu of the selected operating
mode.
If you delete Duration, the set durations
for Finish at and Start at are also deleted.
If you delete Finish at or Start at, the
cooking program will start using the
cooking duration set.