Operating and Installation Instructions

Settings
47
SuperVision
The oven is a Miele@home-compatible
appliance with SuperVisionfunctionality
for monitoring other domestic
appliances in the Miele@home system.
The SuperVisionfunction cannot be
activated until the Miele@home system
has been set up.
SuperVision display
- On
The SuperVisionfunction is turned on.
The symbol will appear in the top
right-hand corner of the display.
- Off
The SuperVisionfunction is turned off.
Display in Standby
The SuperVisionfunction is also
available when the oven is in standby.
However, the time-of-day display must
be turned on (Settings| Time| Display|
On).
- On
Active domestic appliances that are
signed on to the Miele@home system
are always displayed.
- Only if there is a fault
Only faults on active domestic
appliances are displayed.
Appliance list
All domestic appliances signed on to
the Miele@home System are displayed.
Once you have selected an appliance,
you can access further settings:
- Display this appliance
– On
The SuperVisionfunction for this
appliance is turned on.
– Off
The SuperVisionfunction for this
appliance is turned off. The
appliance is still signed on to the
Miele@home system. Faults are
displayed, even if the
SuperVisionfunction for the
appliance has been turned off.
- Buzzer tones
You can select whether the audible
signals are turned on (On) or turned
off (Off) for this appliance.
Remote Update
The Remote Updatemenu option is
only displayed and can only be
selected if the requirements for using
Miele@home have been met (see
“Before using for the first time –
Miele@home”).
The RemoteUpdate function is used for
updating the software in your oven. If
an update is available for your oven, it
will automatically download it. Updates
will not be installed automatically. They
must be initiated manually.
If you do not install an update, you can
continue to use your oven as usual.
However, Miele recommends installing
updates.