Operating and Installation Instructions

Frequently Asked Questions
Problem Possible cause and solution
 FaultF32 appears on
the display.
The door lock for the Self Clean program has not
locked.
 Turn the oven off and then back on again. Start the
Self Clean program again.
 If the message appears again, contact Miele
Customer Service.
 FaultF33 appears on
the display.
The door lock for the Self Clean program has not
opened.
 Turn the oven off and then back on again.
 If the door lock still does not deactivate itself,
contact Miele Customer Service.
Faultand a fault code
not listed here appear
on the display.
A fault has occurred that you cannot resolve.
 Contact Miele Customer Service.
Function currently not avail-
able appears on the dis-
play after you have se-
lected the Descale
function.
The steam injection system is faulty.
 Contact Miele Customer Service.
Fault with moisture control -
Automatic Programs will op-
erate without moisture ap-
pears on the display af-
ter you have selected a
automatic program.
The steam injection system is faulty.
 Contact Miele Customer Service.
Automatic programs can be run without using
moisture injection.
Programs using mois-
ture injection will not
take in water.
Demo mode is activated. You can select menu
options on the display and sensor buttons, but the
steam injection system pump will not work.
 Deactivate Demo mode by selecting Settings|
Showroom Program| Demo Mode| Off.
The pump for the steam injection system is faulty.
 Contact Miele Customer Service.
You can hear a noise af-
ter a cooking program.
The cooling fan remains turned on after a cooking
program (see “Settings – Cooling fan run-on”).
109