Operating and Installation Instructions

Features
25
Baking tray, universal tray, and wire
rack with non-tip safety notches
Baking tray HBB71:
Universal tray HUBB71:
Wire rack HBBR72:
These accessories are inserted into the
oven between the two rails of a side
runner.
Always position the wire rack with the
loading surface in the lower position.
These accessories have non-tip safety
notches installed in the middle of their
short sides. These prevent the trays
from being pulled out completely from
the side runners when you only wish to
pull accessories out partially.
If you are using the universal tray with
the wire rack on top, insert the tray
between the rails of the side runners
and the rack will automatically slide in
above them.
FlexiClip telescopic runners HFC72
You can use the FlexiClip telescopic
runners on shelf levels1–4.
Push the FlexiClip telescopic runners
all the way into the oven before
placing accessories on them.
The accessories will then
automatically sit securely in between
the stoppers at either end of each
runner and be prevented from sliding
off.
The FlexiClip telescopic runners can
support a maximum load of 33lb
(15kg).