Operating and Installation Instructions

Operation
54
 Turn the oven on.
The main menu will appear.
 Place the food in the oven.
 Select Operating Modes.
 Select the operating mode you want
to use.
The operating mode and recommended
temperature will appear.
 Adjust the recommended
temperature, if necessary.
Otherwise, the recommended
temperature will be accepted within a
few seconds. You can change the
temperature later by selecting the
temperature indicator.
 Confirm with OK.
The required and the actual temperature
will appear and the preheating phase
will begin.
You will see the temperature rising on
the display. An audible signal will sound
when the set temperature is reached for
the first time.
 After the cooking program, select
Finish.
 Take the food out of the oven.
 Turn the oven off.
Changing values and settings
for a cooking program
Depending on the operating mode, as
soon as a cooking program is in
progress, you can change the values or
settings for this program.
Depending on the operating mode, you
can change the following settings:
- Temperature
- Duration
- Ready at
- Start at
- Booster
- Preheat
- Rapid cooling
- Keep warm
- Crisp function
Changing the temperature and core
temperature
Via Settings| Recommended temps., you
can permanently adjust the
recommended temperature to suit
your cooking preferences.
The core temperature only
appears if you are using the probe
(see “Roasting – Probe”).
 Tap the temperature display.
 Change the temperature and the
core temperature as required.
 Confirm with OK.
The cooking program will resume with
the new target temperatures.