Operating and Installation instructions

Settings
40
Volume
Buzzer Tones
If audible signals are turned on, an
audible signal will sound when the set
temperature is reached and at the end
of a set time.
The volume of the audible signals is
represented by a segment bar.
-       
Maximum volume
-       
Audible signals are switched off
Keypad Tone
The volume of the tone that sounds
each time you tap a sensor button is
represented by a segment bar.
-       
Maximum volume
-       
Keypad tone is turned off
Welcome Melody
The melody that sounds when you tap
the On/Off button can be turned on
or off.
Units of Measurement
Temperature
You can set the temperature in Celsius
(°C) or Fahrenheit (°F).
Booster
The Boosterfunction is used to quickly
preheat the oven.
- On
The Boosterfunction is automatically
turned on during the preheating
phase of a cooking program. The
browning/broiling element, ring
heating element, and fan all preheat
the oven compartment to the
required temperature at the same
time.
- Off
The Boosterfunction is turned off
during the preheating phase of a
cooking program. Only the heating
elements for the selected operating
mode are used to preheat the oven
compartment.
You can also use the pull-down menu
to turn the Boosterfunction on or off
for a cooking program.
Rapid cooling
Using the Rapid coolingfunction, you can
quickly cool down food and the oven
compartment once the cooking
program is finished.
This function is useful if, for example,
you immediately want to start a
automatic program for which the oven
compartment needs to be cold.
Using the Keep warmfunction, you can
keep food warm after cooking without
inadvertently cooking it further.
- On
The Rapid coolingfunction is turned
on. Once the cooking program has
finished, the door opens a little