Operating and Installation instructions

IMPORTANT SAFETY INSTRUCTIONS
 Maintenance by the user: Never repair or replace any part of the
appliance unless the instructions specifically recommend doing so.
Service work should only be performed by a qualified technician.
 Damage to the oven can compromise your safety. Check the oven
for visible signs of damage. Do not use a damaged oven.
 Temporary or permanent operation on an autonomous power supply
system or a power supply system that is not synchronized with the grid
power supply (e.g., island networks, back-up systems) is possible. A
prerequisite for operation is that the power supply system complies with
national and local codes.
The function and operation of the protective measures provided in the
domestic electrical installation and in this Miele product must also be
maintained in isolated operation or in operation that is not synchronized
with the grid power supply, or these measures must be replaced by
equivalent measures in the installation.
 The electrical safety of this appliance can only be guaranteed
when correctly grounded. It is essential that this basic safety
requirement is fulfilled. If in doubt, the electrical installation should
be checked by a qualified electrician.
 Proper installation: Make sure that your appliance has been
installed correctly and that it has been grounded by a qualified
technician.
 The connection data (voltage and frequency) on the data plate of
the oven must match the domestic electrical supply in order to avoid
the risk of damage to the oven. Compare this before connecting the
appliance to the domestic electrical supply. If in any doubt, consult a
qualified electrician.
 Power bars and extension cords do not guarantee the required
safety of the appliance. Do not use these to connect the oven to the
power supply.
 For safety reasons, only use the oven when it has been fully
installed.
8