Operating and Installation Guide
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Overview
- Control panel
- Using the appliance
- Features
- Before first use
- Settings
- Settings overview
- Opening the “ Settings ” menu
- Language
- Time
- Date
- Lighting
- Start screen
- Display
- Volume
- Units of Measurement
- Quick Microwave
- Popcorn
- Booster
- Recommended temperatures
- Recommended power levels
- Cooling fan run-on
- Proximity sensor ( MotionReact )
- Safety
- Furniture front recognition
- Miele@home
- Remote Control
- SuperVision
- RemoteUpdate
- Electrical version
- Calibrate temperature
- Software version
- Legal information
- Showroom Program
- Factory default
- Alarm + Timer
- Main and submenus
- Microwave operation
- Operation
- Quick Microwave
- Automatic Programs
- Special Modes
- MyMiele
- Favorites
- Baking
- Roasting
- Broiling
- Cleaning and care of the oven
- Frequently Asked Questions
- Customer Service
- Caring for the environment
- Installation
- Declaration of conformity
- Copyrights and licenses
Installation
*INSTALLATION*
117
Taking the oven out of the housing
unit
Open the door.
Unscrew the knurled nuts and bolts
from the front frame (see “Securing
the oven in the housing unit”).
Keep these parts in case the oven
needs to be installed again in the
future.
Risk of injury caused by
dropping the appliance.
The oven can tip forward and cause
serious injuries if the carry handles
are inserted into the holes at the
back.
Always insert the carry handles into
the holes at the front of the side
wall.
Pull the oven out of the housing unit
until the holes for the carry handles
are visible (1.).
Insert the carry handles into the holes
at the front at the top of the side
walls on each side of the oven (2.).
Do not carry the oven by the door
handle. This could damage the door.
Use the carry handles on the side of
the housing to lift the appliance.
Take the oven out of the housing unit.
Disconnect the oven from the power
supply.