Operating instructions Rotary iron HM 21-140 To prevent accidents and machine damage read these instructions before installation or use. UV M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Guide to the rotary iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Correct dampness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT SAFETY INSTRUCTIONS To prevent injury and machine damage read all instructions before installation or use. Electrical safety Be certain this appliance is properly installed and grounded by an authorized technician. To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement be met and tested. Consult a qualified electrician if in doubt.
Guide to the rotary iron a Heater plate with finger guard g Laundry wipe off unit b Roller h 4 height adjustable feet c Temperature selector i Foot pedal switch d Feed board j Emergency release (power failure) e Control panel k Ironing table f Laundry compartment 4
Guide to the rotary iron a Roller speed selector b % "Heating" indicator c On/Off button To turn the rotary iron on and off. The indicator lights when the machine is turned on. d h "Start" button To start ironing. The heater plate lowers to the roller and the roller turns.
Guide to the rotary iron Roller speed selector Finger guard The roller speed can be increased by turning the selector clockwise and decreased by turning it counterclockwise. Temperature selector H (cold) = the heater is turned off ß = low temperature ßß = medium temperature ßßß= high temperature 6 The finger guard is a safety feature to prevent injuries. When the finger guard is lifted, the roller stops and the heater plate raises off the roller.
Guide to the rotary iron Foot pedal switch Coin mechanism Switch position 1 (inactive) Ironing 1 = Coin slot Switch position 2 Steaming After inserting a coin or token the preprogrammed running time is displayed.
Use Correct dampness Ironing tips For best results, the residual moisture of the laundry should be 25%. – To avoid creasing stop the roller, pull the item back slightly and smooth out. If necessary, dampen again with a wet cloth or spray bottle. Laundry which contains more than 50% synthetic fibers must not be ironed in this machine. The synthetics might melt at the high temperatures. Laundry with less synthetics can be ironed at a low temperature.
Use Turning the rotary iron on ^ Plug the machine in and press the 0 - I (On/Off) button. ^ Select the desired temperature with the temperature selector. The On/Off indicator lights. Rotary iron with coin mechanism The running time display lights. ^ Insert coins or token. The respective running time is displayed in minutes.
Use Testing the finger guard The finger guard is a safety feature and should be checked before each use of the rotary iron. ^ Press the h "Start" button. The heater plate lowers and the roller turns. ^ Lift the finger guard. The roller stops and the heater plate rises off the roller. ^ Select the roller speed slow or fast, depending on dampness and type of laundry. ^ The rotary iron is ready to operate when the % "Heating" indicator goes out. 10 ^ Turn the iron on again with the h "Start" button.
Use Ironing ^ Release the foot pedal switch after feeding the item in. The heater plate lowers down to the roller. Rotary iron with coin mechanism ^ Insert the prepared laundry by feeding it over the feed board. At the end of the pre-programmed running ^ Smooth the items during ironing from the middle to the edges. time the heater plate raises and the roller stops turning.
Frequently asked questions Power failure In the event of a power failure, pull the emergency release lever up. If there is a power failure when the rotary iron is in use, the heater plate will stay on the roller. The item being ironed will be held there possibly becoming scorched. Protecting the roller and iron cover – During breaks and after ironing the heater plate should be raised. The roller and the iron cover durability will be increased. Avoid running the iron without laundry.
Cleaning and Care Cleaning the heater plate ,Do not use abrasive cleaning agents, scrubbing sponges or sand paper. Lime and starch deposits can build up on the heater plate. ^ Clean the heater plate 1 - 3 times per week using an iron waxing cloth and cleanpaste. ^ For stubborn deposits use a cleaning cloth in addition to the cleaning mat. ^ The heater plate should be waxed after each cleaning. Original cleaning cloths and ironing wax should only be obtained from Miele.
After sales service In the event of a problem, please contact the Miele Technical Service Department at the phone number on the back of this booklet. When contacting Technical Service please quote the model (M.-Nr.) and serial number (Fabr.-Nr.) of the machine. These can be found on the silver data plate. Only use original Miele spare parts for maintenance or repairs on this machine.
Guide to the data plate symbols 1 Machine type 15 Electric heating 2 Serial number/Year of production * 16 Fuse (on site) 3 Voltage/Frequency 17 Steam heating indirect 4 Fuse rating 18 Steam heating direct 5 Drive motor 19 Gas heating 6 Plate diameter/Plate quantity * 20 Commissioning date 7 Drum data 8 Drum diameter/Drum depth 21 Water-Registration DVGW-test cert (Water) 9 Spin speed 22 Field for CE test symbol 10 Drum volume/Laundry dry weight 11 Kinetic Energy 12 Ex.
Miele Ironing Handbook
Introduction General notes on ironing Fabrics suitable for ironing Correctly ironed laundry will be smooth, crease-free and not misshapen. However, in order to achieve this, the correct combination of mechanical energy, heat and steam is required. Different types of fabric react differently to being ironed. Cottons and linens expand when wet, and ironing at a high temperature and pressure will make these fabrics smooth, shiny and dry.
Introduction Washing items prior to ironing Cleaning and caring for heater plate The washing process is very important. Follow the manufacturers guidelines on detergent. It too much detergent is used and is not fully rinsed, residues can be left on the laundry. Regular cleaning and maintenance of the heater plate is essential for the protection of the motor and the roller cover, and helps to prolong the life of the machine.
Caring for your rotary iron Accessories for cleaning Waxing and cleaning Nomex cleaning cloth max. 284°F (140°C) For daily removal of residue and starch from the roller. At the end of the workday or as needed (to clean light deposits): apply a small quantity of Cleanpaste with a clean wax cloth. This will loosen any minor soiling overnight, and help prevent the build-up of deposits on the rotary iron. For best results, use the whole width of the iron. Cleaning mat, round-grained max.
Caring for your rotary iron How to use the cloth with pouch General notes – Use separate cloths for ironing wax and Cleanpaste. The amount and frequency of application can vary according to use, as a general rule "Less is more". – When using the cleaning cloth make sure that the maximum recommended temperature is not exceeded. Passing a cleaning cloth or wax cloth through the rotary iron Do not use abrasive cleaning materials, e.g. sand paper, to clean aluminum heater plates.
Frequently asked questions Creases and wrinkles Possible cause Starch deposits Solution – Adjust the quantity of detergent to the water hardness in your area.
Frequently asked questions Discoloration of the iron cover Possible cause Solution Brown/Dark yellow: Normal due – Clean the heater plate – Wash or replace the iron cover to heat from roller Black (striped or patches): Fibers – Use the recommended temperature for the fabric being ironed or plastics may have melted or Use only original Miele spare parts – burnt to the iron Jet-black on ends of roller which has occurred very quickly. – Check the air supply to the room.
Installation Instructions
Installation instructions Condensate trap The rotary iron should be installed by a Miele trained installer. Installation site ,Do not operate the rotary iron in a room where cleaning machines are operated with solvents containing CFC. These vapors could damage the machine. The machine does not require any special anchorage or base installation. ^ Select a location which has sufficient light for comfortable operation. Installation ^ Level the rotary iron with the 4 height adjustable feet.
Installation instructions Electrical connection ,All electrical work must be performed by a qualified service technician in accordance with all applicable codes and standards. ^ Regard the data plate, wiring diagram, conversion and installation plan. The wiring diagram is located under the cover of the right side column. The machine is supplied for 230V, 60 Hz, 3AC. ^ If converted to another voltage, mark it with D on the data plate.
Help to protect the environment Disposal of the packing materials Disposal of an old appliance The packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Old appliances may contain materials that can be recycled. Please contact your local recycling center about the possibility of recycling these materials. To prevent suffocation, ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children.
All rights reserved / 1806 06 858 360 / 00