Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the range
- Controls for the range
- Features
- Data plate
- Scope of delivery
- Standard and optional accessories
- Side racks
- Universal tray and Wire Rack with anti-tip safety notches
- FlexiClips with Wire Rack HFCBBR 30-3
- Installing and removing the FlexiClips with Wire Rack
- Temperature selector with °C scale
- Replacing the temperature selector
- Round baking pans
- Perforated Gourmet Baking Tray HBBL 71
- Broiling and roasting insert HGBB 30-1
- HUB Gourmet Casserole Dishes HBD Gourmet Casserole Dish lids
- Accessories for cleaning and care
- Gas cooktop safety features
- Oven safety features
- PerfectClean treated surfaces
- Self-Clean-ready accessories
- Before first use
- Using the gas cooktop
- Using the oven
- Overview of operating modes
- Energy-saving tips
- Simple operation
- Preheating
- Operating the clock/timer
- Switching cooking programs on and off automatically
- Setting the cooking duration
- Setting a cooking duration and a finish time
- First set the cooking duration:
- Then set the finish time:
- At the end of the cooking duration:
- Changing the cooking duration
- Deleting a cooking duration
- Deleting a finish time
- Changing the time of day
- Changing factory default settings
- Settings overview
- Switching the system lock on and off
- Activating the system lock
- Deactivating the system lock for a cooking process
- Deactivating the system lock
- Using the timer
- Setting the timer
- Changing the timer
- Deleting the timer
- Baking
- Roasting
- Broiling
- Further applications
- Gas cooktop cleaning and care
- Cleaning and care of the oven
- Frequently Asked Questions
- Customer Service
- Caring for the environment
Using the oven
41
Changing factory default settings
Default settings are set in the oven
controls at the factory (see “Settings
overview”).
A setting can be changed by altering its
status.
The settings can only be changed
when the mode selector is atOff.
Select OK.
If necessary, use or to move the
triangle until it appears under .
Confirm with OK.
appears:
If you want to change another setting,
select the appropriate number with
or .
Confirm with OK.
The setting is selected and the current
status appears, e.g., .
To change the status:
Set the desired status using or .
Confirm with OK.
The status is saved and the setting
appears again.
To change additional settings,
proceed in the same way.
If you do not want to change any
further settings, select .
The settings will remain in the memory
in the event of a power failure.