Operating and Installation instructions

Table Of Contents
Frequently Asked Questions
Problem Possible cause and solution
The ignitor does not
function properly.
The breaker in the building’s wiring system has
tripped.
Contact a qualified electrician or Miele Customer
Service if necessary.
There is food residue stuck between the ignitor and
the burner cap.
Remove any soiling (See “Gas cooktop cleaning
and care”).
The display is dark. There is no power to the oven.
Check if the breaker has tripped. If it has, contact
a qualified electrician or Miele Customer Service.
The oven does not heat
up.
You have only selected an operating mode or a
temperature.
Select both a mode and a temperature.
The system lock is activated.
Switch the system lock off (see “Using the oven –
Operating the clock/timer”).
There is no power to the oven.
Check if the breaker has tripped. If it has, contact
a qualified electrician or Miele Customer Service.
Demo mode is activated.  appears.
The oven can be operated, however the heating
elements will not work.
Deactivate demo mode (see “Using the oven –
Operating the clock/timer”).
 is flashing in the
display.
There has been a power failure.
Reset the time of day (see “Before using for the
first time”).
Cooking times will also need to be reset.
 appears unexpect-
edly in the display and
is flashing at the
same time. The audible
signal might also be
sounding.
The oven has been operating for an unusually long
period of time, and this has activated the safety shut-
off.
Turn the mode selector toOff. The oven is ready
for use again immediately.
71