Operating and Installation instructions

Table Of Contents
Anti-tip device
*INSTALLATION*
101
1 22 33
a
Locking clamp
b
Rear adjustment
c
Front adjustment
Align the Range.
Slide the locking clamp firmly
back.
In the Range housing, there is an
opening for the bolt of the anti-tip
device. The opening allows the Range
to be slid onto the anti-tip device and
back to the wall.
The locking clamp must noticeably
engage with the bolt so that anti-tip
protection is ensured for the Range.
a
Opening in the Range housing
b
Anti-tip device bolt
c
Locking clamp with slot
The toe kick panel can only be
attached if the locking clamp has
been slid all the way into the
appliance.
Secure the toe kick panel onto the
Range.
Disconnecting the range from
the anti-tip device
WARNING
Children and adults can tip over the
range if has not been secured. This
may lead to fatal injuries.
If you need to remove the range from
its installation space, e.g. for service,
you first need to disconnect the
appliance from the anti-tip device.
Follow the instructions for installation
in reverse order.