Operating and Installation instructions

Table Of Contents
Electrical connection
*INSTALLATION*
Data plate
The data plate is located behind the toe kick panel. The toe kick panel is attached
to the toe kick of the Range by magnets so it can be removed and put back again
easily.
There you can find the model number, serial number and the connection data
(voltage/frequency/maximum rated load) for your Range.
Have this information available if you need to contact Miele so that any issues can
be rectified as quickly as possible.
This appliance must be grounded in compliance with all applicable local and
national regulations.
Installation, repair and maintenance work should only be performed by a Miele
authorized service technician in compliance with local regulations and the ANSI
National Electrical Code / NFPA 70 in the United States or the Canadian
Electrical Code, Part I in Canada (CSA standard C22.1).
SAVE THESE INSTRUCTIONS FOR THE ELECTRICAL INSPECTOR'S USE.
106