Installation Manual

Anti-tip device
73
Checking the installation
space
Install the anti-tip device on the floor,
concr
ete wall or timber framing. The
surface must be flat and level.
 Check t
he base surface.
 Check the installation dimensions.
 Che
ck the diagrams for the building's
supply lines. Make sure that you do
not damage any lines when drilling
the holes to attach the anti-tip
device.
 Check the position of the electric,
gas and water connections (see
"Electrical connection", "Gas
connection" and "Plumbing"). An
overview on the electrical
connections for your range can be
found in "Notes on installation".
Included accessories
– 1 anti-tip device
– 4 screws
– 4 plugs