Installation Manual

Anti-tip device
77
In the range housing, there is an
opening 
for the bolt  of the anti-tip
device. The opening allows the range to
be slid onto the anti-tip device and
back to the wall.
The locking clamp  must noticeably
engage with the bolt 
so that anti-tip
protection is ensured for the range.
1
2
3
a
Opening in the range housing
b
Bolt of the anti-tip device
c
Locking clamp with slot
The toe-kick cover can only be
attached if the locking clamp  has
been slid all the way int
o the
appliance.
 Mou
nt the toe-kick cover on the
range.
Disconnecting the range from
the anti-tip device
 W
ARNING
Children and adults can tip over the
r
ange if has not been secured. This
may lead to fatal injuries.
If you need to remove the range from
i
ts installation space, e.g. for service,
you first need to disconnect the
appliance from the anti-tip device.
 F
ollow the instructions for installation
in reverse order.