Operating and Installation instructions

Frequently Asked Questions
145
Problem Possible cause and solution
No signal to roast probe
appears in the display.
The roast probe is not being recognized.
 Reposition the roast probe in the food.
If the roast probe is still not being recognized, the
signal has failed due to another cause.
In some cases, reception interference can even be
caused by a microwave operating in the vicinity of the
oven, because the microwave uses a similar
frequency range to that of the wireless roast probe.
 Turn off the microwave when you are using the
wireless roast probe.
If the roast probe is still not being recognized, it is
faulty. You can purchase a new roast probe from your
Miele dealer or from Miele Technical Service.
Fault with moisture control -
the MasterChef programs
will operate without moisture
appears in the display
after a MasterChef Plus
has been selected.
The evaporation system is faulty.
 Contact Miele Service.
In the meantime, you can run a program that does
not use added moisture.
Fault with moisture control -
Moisture Plus program not
available appears in the
display after selecting
Moisture Plus.
The steam injection system is faulty.
 Contact Miele Technical Service.
 Use the Convection Bake program instead of
Moisture Plus.
Programs using
moisture will not take in
water.
Demo mode is activated. The oven can be operated
but the pump for the steam injection system is not
working.
 Deactivate Demo mode (see “Settings –
Showroom Program”).
The pump for the steam injection system is faulty.
 Contact Miele Technical Service.
A noise is heard after
the cooking process is
complete.
The fan remains turned on after a cooking program
(see “Settings - Cooling fan”).