Operating and Installation instructions

Operating the cooktop
53
Booster
The burners are equipped with a
booster two-level TwinBooster (see
“Guide to the appliance”).
When activated, the power is boosted
for a maximum of 15minutes so that
large quantities can be heated quickly,
e.g. water for cooking pasta.
You can use the booster for a maximum
of two burners simultaneously. After the
booster time has expired, the cooktop
switches back automatically to the
highest power level.
The burners are connected in pairs in
order to provide sufficient power for the
booster.
The connected burner will operate at
reduced power while the booster is on.
This has one of the following effects:
– If the AutoBoost was previously
active, it will be switched off.
– The power level that is set will be
reduced.
– The connected burner will be
switched off.
Activating the booster
 Turn the knob to the right slightly
beyond the stop to B and back to the
stop.
 appears in the burner display.
Level 1
 Turn the knob to the right slightly
beyond the stop to B I/II and back to
the stop.
 appears in the burner display.
Level 2
 Turn the knob to the right slightly
beyond the stop to B I/II and back to
the stop.
 Turn the knob to the right slightly
beyond the stop to B I/II and back to
the stop once again.
 appears in the burner display.
Turning off the booster / TwinBooster
 Select a different power level.
The booster symbol goes out.