Operating instructions/Installation instructions

Settings
50
Showroom program
This function enables the oven to be
demonstrated in showrooms without
heating up. Do not activate this setting
for domestic use.
Demo mode
If you have demo mode activated
Demo Mode active. The appliance will not
heat up will appear when you turn on
the oven.
– On
Touch OK for at least 4seconds to
activate demo mode.
– Off
Touch OK for at least 4seconds to
deactivate demo mode. You can use
the oven as normal.
Factory default settings
– Settings
Any settings that have been altered
will be reset to the factory default
setting.
– Favorites
All Favorites will be deleted.
– Recommended temperatures
Any recommended temperatures that
have been changed will reset to the
factory default settings.
– MyMiele
All MyMiele entries will be deleted.
Lift panel
Regardless of the setting selected, as
soon as you start the self-cleaning
cycle, the lift panel goes down
automatically.
– Automatically
The lift panel lifts up automatically as
soon as you switch the oven on.
The lift panel goes down
automatically as soon as you switch
the oven off.
– Manual
Touch the lift panel sensor button to
lift the control panel up and put it
down.