Operating instructions/Installation instructions

Operation
16
Opening and closing the
drawer
The warming drawer is fitted with an
non-slip mat which prevents dishware
from sliding around when the drawer
is opened and closed.
 The warming drawer can be opened
or closed by lightly pressing the
middle of the drawer front.
Basic operation
The On/Off button  must remain
free of grime and liquids. Failure to
keep the sensor button clean may
cause it to become unresponsive or
to switch uncontrollably.
Liquids that get inside the warming
drawer can cause a short-circuit.
Open and close a loaded drawer
carefully to prevent liquids from
spilling.
 Open the warming drawer.
 Touch the On/Off button  to switch
on the warming drawer.
 Touch the “Menu” sensor until the
desired operating mode lights up.
 Touch the “Temperature” sensor
repeatedly until the LED with the
desired temperature lights up.
 If you wish to set a warming time,
touch the “Duration” sensor until the
desired number of hours lights up.
 Close the warming drawer.
Operating modes
The following modes are available:
– 
Warming cups and glasses
– 
Warming dishes and plates
– 
Keeping food warm
– 
Low temperature