Operating instructions/Installation instructions

Cleaning and care
26
Cleaning the appliance front
and interior
The On/Off button must remain free of
grime and liquids. Failure to keep the
sensor button clean may cause it to
become unresponsive or to switch
uncontrollably.
 Remove normal soiling immediately
using a clean sponge with warm
water and liquid dish soap applied
with a clean, damp microfiber cloth.
 Make sure to wash away any
residues left by the cleaning agents
using clean water.
This is particularly important on
surfaces treated with PerfectClean
enamel, as cleaner residues can
negatively affect their non-stick
properties.
 After cleaning, dry the surfaces with a
soft cloth.
Cleaning the non-slip mat
Do not clean the non-slip mat in the
dishwasher or washing machine.
Never place it in the oven to dry!
 Remove the non-slip mat for
cleaning.
 Clean the mat by hand only, using
warm water and a small amount of
liquid dish soap, and then dry using a
cloth.
 Do not return the non-slip mat to the
warming drawer until it is completely
dry.