Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Notes on installation
- All Gas Range dimensions
- All Electric Range dimensions
- Dual Fuel Range dimensions
- HR 1724-3 DF
- Detailed views of HR 1724-3 DF
- HR 1924-3 DF
- Detailed views of HR 1924-3 DF
- HR 1934-3 DF, HR 1935-3 DF, HR 1936-3 DF
- Detailed views of HR 1934-3 DF
- Detailed views of HR 1935-3 DF
- Detailed views of HR 1936-3 DF
- HR 1954-3 DF, HR 1955-3 DF, HR 1956-3 DF
- Detailed views of HR 1954-3 DF
- Detailed views of HR 1955-3 DF
- Detailed views of HR 1956-3 DF
- Anti-tip device
- Plumbed water connection
- Electrical connection
- Gas connection
- Burner ratings
- Burner ratings HR 1124-3 AG
- Burner ratings HR 1134-3 AG
- Burner ratings HR 1135-3 AG
- Burner ratings HR 1136-3 AG
- Burner ratings HR 1724-3 DF
- Burner ratings HR 1924-3 DF
- Burner ratings HR 1934-3 DF
- Burner ratings HR 1935-3 DF
- Burner ratings HR 1936-3 DF
- Burner ratings HR 1954-3 DF
- Burner ratings HR 1955-3 DF
- Burner ratings HR 1956-3 DF
- Customer Service
- Caring for the environment
- Copyrights and licenses
IMPORTANT SAFETY INSTRUCTIONS
The following applies to stainless steel surfaces:
Adhesives will damage the coated stainless steel surface and
cause it to lose its dirt-repellent protective coating. Do not use sticky
notes, adhesive tape, or other types of adhesive on the stainless
steel surface.
Magnets can cause scratches. Do not use the stainless steel
surface as a magnetic notice board.
Accessories
Only use original Miele accessories. Using parts or accessories
from other manufacturers will invalidate the warranty, and Miele
cannot accept liability.
Only use the Miele probe supplied with the appliance. If it is faulty,
it must be replaced with a new original Miele probe.
The plastic on the probe can melt at very high temperatures. Do
not use the probe when using the broiling operating modes. Do not
store the probe in the oven compartment when it is not being used.
Accessories that are not suitable for the Self Clean program will
be damaged by the high temperatures. Remove all accessories that
are not suitable for the Self Clean program from the oven
compartment before starting the Self Clean process. This also
applies to optional accessories that are not suitable for the Self
Clean program (see “Cleaning and care of the oven”).
Preparing for a long period of absence
If you turn off your domestic water connection when you’re going
to be away for a long period of time, please note that this may not be
enough to prevent water damage. To eliminate the risk of water
damage, close the faucet at each individual appliance.
KEEP THE OPERATING AND INSTALLATION INSTRUCTIONS IN A SAFE
PLACE AND REVIEW THEM PERIODICALLY.
15