Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Notes on installation
- All Gas Range dimensions
- All Electric Range dimensions
- Dual Fuel Range dimensions
- HR 1724-3 DF
- Detailed views of HR 1724-3 DF
- HR 1924-3 DF
- Detailed views of HR 1924-3 DF
- HR 1934-3 DF, HR 1935-3 DF, HR 1936-3 DF
- Detailed views of HR 1934-3 DF
- Detailed views of HR 1935-3 DF
- Detailed views of HR 1936-3 DF
- HR 1954-3 DF, HR 1955-3 DF, HR 1956-3 DF
- Detailed views of HR 1954-3 DF
- Detailed views of HR 1955-3 DF
- Detailed views of HR 1956-3 DF
- Anti-tip device
- Plumbed water connection
- Electrical connection
- Gas connection
- Burner ratings
- Burner ratings HR 1124-3 AG
- Burner ratings HR 1134-3 AG
- Burner ratings HR 1135-3 AG
- Burner ratings HR 1136-3 AG
- Burner ratings HR 1724-3 DF
- Burner ratings HR 1924-3 DF
- Burner ratings HR 1934-3 DF
- Burner ratings HR 1935-3 DF
- Burner ratings HR 1936-3 DF
- Burner ratings HR 1954-3 DF
- Burner ratings HR 1955-3 DF
- Burner ratings HR 1956-3 DF
- Customer Service
- Caring for the environment
- Copyrights and licenses
Plumbed water connection
103
Connecting the appliance to
the water supply line
Make sure that the supply line is not
kinked or damaged.
Remove the water connection cover
at the back of the appliance.
Take the angled side of the brass
fitting and check whether a gasket is
present. If not, insert one.
Screw the supply line coupling nut
onto the threaded union.
Ensure that the supply line is
correctly fitted and that it is water-
tight.
Connecting to the water supply
Disconnect the appliance from the
power supply before connecting it to
the water supply.
Turn off the water supply at the
faucet before connecting the
appliance to the water supply.
Make sure that the faucet remains
accessible after the appliance has
been installed.
A faucet with a 3/8" connection thread
is required for the connection.
Connect the stainless steel hose to
the water supply.
Old or used hoses must not be
connected to the appliance.
Only use the stainless steel hose
supplied.
Connect the compression fitting to
the water supply.
Slowly open the shut-off valve to the
water supply and check for leaks. If
necessary, check whether the sealing
ring and fittings are tight.
You can now continue installing the
appliance.