Operating and Installation instructions

Table Of Contents
Electrical connection
*INSTALLATION*
104
The plug must be inserted into a
suitable outlet that has been installed
and grounded in compliance with all
applicable local regulations.
WARNING: THIS APPLIANCE MUST
BE GROUNDED
Installer: Please pass these
instructions on to the customer.
WARNING:
During installation, maintenance, and
repair work, the Range must be
disconnected from the domestic
electrical supply by fully unscrewing
the breakers, switching off the
breakers, and unplugging the power
cord from the socket. To do this, pull
the plug, not the power cord.
Installation, repairs, and other work
by unqualified persons could be
dangerous. Miele cannot be held
liable for unauthorized work.
Installation, maintenance, and repairs
must only be carried out by a Miele
authorized technician.
The connection data (voltage and
frequency) on the data tag of the
Range must match the domestic
electrical supply in order to avoid the
risk of damage to the Range.
Compare this data before connecting
the appliance. If in any doubt,
consult a qualified electrician.
The internal electrical wiring of the
appliance was carried out and tested
in accordance with the current
regulations. To make sure that your
appliance runs smoothly, ensure that
the socket has the correct phase
assignment. If in any doubt, consult
a qualified electrician.