Operating Instructions

Features
33
The models described in these
operating instructions can be found at
the end.
Data plate
The data plate is located behind the toe
kick panel. The toe kick panel is
attached to the toe kick of the Range by
magnets so it can be removed and put
back again easily.
There you can find the model number,
serial number and the connection data
(voltage/frequency/maximum rated
load) for your Range.
Have this information available if you
need to contact Miele so that any
issues can be rectified as quickly as
possible.
Extra data plate
The extra data plate for connecting the
oven to your WiFi is located on the front
frame of the oven.
Scope of delivery
- Installation instructions for the range
- Operating instructions for the range,
for using the cooktop and oven
functions
- Precision probe
- Anti-tip device including screws for
securing the range
- Various accessories
Standard and optional
accessories
Features will vary depending on
model.
The side runners, universal tray, and
wire rack (or “rack” for short) are
supplied as standard with the oven.
Depending on the model, your oven
may also come supplied with some of
the accessories listed here.
All the accessories listed as well as the
cleaning and care products are
designed for Miele Ranges.
These can be ordered from the Miele
web store, Miele Customer Service, or
from your Miele dealer.
When ordering, please quote the model
number of your range and the reference
number of the accessories required.
Side racks
Side racks for accessories are installed
on either side of the oven compartment
for shelf levels.
The shelf level numbers are indicated
on the front of the oven frame.
Each level consists of a rail on which
you can place the wire rack, for
example.
You can remove the side racks (see
“Cleaning and care of the oven – Side
rack removal”).