Operating Instructions

Operating the induction cooktop
47
Turning on the induction
cooktop
Do not heat empty pots on the
cooktop as this this can damage the
ceramic surface.
Never leave the cooktop unattended
when it is turned on.
Hot items placed down on the
display can damage the electronics
underneath.
Never place hot pots or pans in the
area of the display.
The burner control knobs must not be
turned beyond B or BI/II to  or 0.
You can choose between  and 
power levels.
 Turn the burner control knob
clockwise.
The display shows the desired power
level for the selected burner.
Auto heat-up
When Auto heat-up is activated, the
burner turns on automatically at the
highest setting and then switches to the
continued power level that you have
previously selected. The heat-up time
depends on which continued cooking
level has been chosen (see table).
Activating Auto heat-up
 Turn the burner control knob
counterclockwise to the symbol
and hold it there until  flashes once.
 Turn the burner control knob
clockwise until the desired continued
cooking level is displayed.
During the heat-up time,  flashes on
the display alternately with the
continued cooking level.
When you change the continued
cooking level, you deactivate Auto
heat-up.
Deactivating Auto heat-up
 Select a different power level during
the heat-up time.
Auto heat-up will be deactivated.
Continued
cooking level
Heat-up time
[min : sec]
 Approx. 0 : 15
 Approx. 0 : 15
 Approx. 0 : 25
 Approx. 0 : 50
 Approx. 2 : 00
 Approx. 5 : 50
 Approx. 2 : 50
 Approx. 2 : 50
 –