Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the range
- Controls for the range
- Using the appliance
- Features
- Data plate
- Scope of delivery
- Standard and optional accessories
- Side racks
- Universal tray and Wire Rack with anti-tip safety notches
- FlexiClips with Wire Rack HFCBBR 30-3
- Installing and removing the FlexiClips with Wire Rack
- Round baking pans
- Perforated Gourmet Baking Tray HBBL 71
- Broiling and roasting insert HGBB 30-1
- HUB Gourmet Casserole Dishes HBD Gourmet Casserole Dish lids
- Wireless precision probe
- Accessories for cleaning and care
- Gas cooktop safety features
- Oven safety features
- PerfectClean treated surfaces
- Self-Clean-ready accessories
- Before first use
- Using the gas cooktop
- Using the oven
- Settings
- Settings overview
- Opening the “ Settings ” menu
- Language
- Time
- Date
- Lighting
- Start screen
- Display
- Volume
- Units of Measurement
- Booster
- Recommended temperatures
- Self clean
- Cooling fan run-on
- Proximity sensor ( MotionReact )
- Safety
- Miele@home
- Remote Control
- SuperVision
- RemoteUpdate
- Lift-up panel
- Electrical version
- Probe
- Calibrate temperature
- Software version
- Legal information
- Showroom Program
- Factory default
- Alarm + Timer
- Main and submenus
- Moisture Plus
- Automatic Programs
- Special Modes
- MyMiele
- Favorites
- Baking
- Roasting
- Broiling
- Gas cooktop cleaning and care
- Cleaning and care of the oven
- Frequently Asked Questions
- Customer Service
- Caring for the environment
- Declaration of conformity
- Copyrights and licenses
Using the gas cooktop
43
Switching on the burner
Do not turn the control knob clockwise
past the Off position.
When a control knob is activated, a
spark is developed automatically on all
burners. This is normal and does not
indicate a fault.
You may notice a brief re-ignition (1–
2clicks) when turning on the
appliance, e.g., because of a draft.
Push in the control knob for the
burner required and turn it
counterclockwise to High.
The ignitor “clicks” and ignites the gas.
If the burner fails to ignite, turn the
control knob to the Off position.
Aerate the room or wait at least
1minute before trying again.
If the burner does not ignite the
second time, turn the control knob
back to Off and see “Frequently
asked questions”.
Switching on during a power
failure
If there has been a power failure,
the automatic re-ignition feature will
not work properly.
Operate the cooktop only under
supervision. If the burner has not
ignited or the flame goes out, turn
the control knob to Off.
Normal and power burners
In case of a power failure, the flame
can be ignited manually.
Push in the control knob and turn it
counterclockwise to High.
Light the emerging gas/air mixture
with a match.