Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the range
- Controls for the range
- Using the appliance
- Features
- Data plate
- Scope of delivery
- Standard and optional accessories
- Side racks
- Universal tray and Wire Rack with anti-tip safety notches
- FlexiClips with Wire Rack HFCBBR 30-3
- Installing and removing the FlexiClips with Wire Rack
- Round baking pans
- Perforated Gourmet Baking Tray HBBL 71
- Broiling and roasting insert HGBB 30-1
- HUB Gourmet Casserole Dishes HBD Gourmet Casserole Dish lids
- Wireless precision probe
- Accessories for cleaning and care
- Gas cooktop safety features
- Oven safety features
- PerfectClean treated surfaces
- Self-Clean-ready accessories
- Before first use
- Using the gas cooktop
- Using the oven
- Settings
- Settings overview
- Opening the “ Settings ” menu
- Language
- Time
- Date
- Lighting
- Start screen
- Display
- Volume
- Units of Measurement
- Booster
- Recommended temperatures
- Self clean
- Cooling fan run-on
- Proximity sensor ( MotionReact )
- Safety
- Miele@home
- Remote Control
- SuperVision
- RemoteUpdate
- Lift-up panel
- Electrical version
- Probe
- Calibrate temperature
- Software version
- Legal information
- Showroom Program
- Factory default
- Alarm + Timer
- Main and submenus
- Moisture Plus
- Automatic Programs
- Special Modes
- MyMiele
- Favorites
- Baking
- Roasting
- Broiling
- Gas cooktop cleaning and care
- Cleaning and care of the oven
- Frequently Asked Questions
- Customer Service
- Caring for the environment
- Declaration of conformity
- Copyrights and licenses
Settings
62
Deactivate RemoteUpdate if you do not
want to install the update.
The update may take several minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not turn the oven off during the
update. Otherwise, the update will be
aborted and will not be installed.
- Some software updates can only be
carried out by Miele Customer
Service.
Lift-up panel
Regardless of the setting selected, as
soon as you start the Self Clean
program the lift panel will go down
automatically.
- Automatic
The lift panel raises automatically as
soon as you turn the range on.
The lift panel goes down
automatically as soon as you turn the
range off.
- Manual
Touch the Lift Panel sensor button to
raise and lower the lift panel.
Electrical version
You can set the voltage variant. The
setting must correspond to the voltage
of your domestic electrical supply.
Probe
The oven is factory set to automatically
detect the probe.
If you have purchased a new Miele
probe, you must enter a 12-digit code
for this setting. You can then start using
the probe.
Follow the description supplied with
the replacement part.
Calibrate temperature
You can change the temperature in
increments in all operating modes and
automatic programs so that it is higher
or lower in the oven compartment than
displayed.
The temperature calibration is
represented by a bar with seven
segments.
If all of the segments are filled, the oven
compartment temperature is much
higher than displayed. If one segment is
filled, the oven compartment
temperature is much lower than
displayed.