Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the range
- Controls for the range
- Using the appliance
- Features
- Data plate
- Scope of delivery
- Standard and optional accessories
- Side racks
- Universal tray and Wire Rack with anti-tip safety notches
- FlexiClips with Wire Rack HFCBBR 30-3
- Installing and removing the FlexiClips with Wire Rack
- Round baking pans
- Perforated Gourmet Baking Tray HBBL 71
- Broiling and roasting insert HGBB 30-1
- HUB Gourmet Casserole Dishes HBD Gourmet Casserole Dish lids
- Wireless precision probe
- Accessories for cleaning and care
- Gas cooktop safety features
- Oven safety features
- PerfectClean treated surfaces
- Self-Clean-ready accessories
- Before first use
- Using the gas cooktop
- Using the oven
- Settings
- Settings overview
- Opening the “ Settings ” menu
- Language
- Time
- Date
- Lighting
- Start screen
- Display
- Volume
- Units of Measurement
- Booster
- Recommended temperatures
- Self clean
- Cooling fan run-on
- Proximity sensor ( MotionReact )
- Safety
- Miele@home
- Remote Control
- SuperVision
- RemoteUpdate
- Lift-up panel
- Electrical version
- Probe
- Calibrate temperature
- Software version
- Legal information
- Showroom Program
- Factory default
- Alarm + Timer
- Main and submenus
- Moisture Plus
- Automatic Programs
- Special Modes
- MyMiele
- Favorites
- Baking
- Roasting
- Broiling
- Gas cooktop cleaning and care
- Cleaning and care of the oven
- Frequently Asked Questions
- Customer Service
- Caring for the environment
- Declaration of conformity
- Copyrights and licenses
Roasting
91
Probe
Risk of injury. The metal tip of the
probe can cause injury.
The wireless probe enables the roasting
process to be monitored simply and
reliably. The wireless probe can be
cleaned in the dishwasher.
How it works
The metal tip of the probe must be fully
inserted into the center of the food. It
contains four temperature sensors. The
sensors measure the core temperature
inside the food during the cooking
process.
They are designed to monitor the rise
in temperature in the coldest part of
the food. The coldest part is usually in
the center (core) of the food. The four
temperature sensors are arranged in
the metal tip so that the measured
values they provide can be used to
calculate the temperature in the
coldest part of the food. This is still
possible even if the metal tip is not
located exactly in the core of the food.
The rise in the core temperature reflects
the extent to which the food is cooked.
You can program the core temperature
to be lower or higher, depending on
whether you want your meat to be rare,
medium, or well done.
The core temperature can be set up to
210°F (99°C). Information on food and
respective core temperatures can be
found in “Special Modes – Slow
Roasting”.
The cooking duration will be similar for
cooking processes with or without the
probe.
The core temperature value is sent via
radio signal from the transmitter in the
handle of the wireless probe via the
antenna in the top right of the oven to
the electronic of the appliance as soon
as the food is put in the oven with the
probe inserted.
Efficient radio transmission is only
guaranteed if the oven door is closed. If
the door is opened during a cooking
process, e.g., to baste the food, radio
signal transmission is interrupted. It will
only resume when the door is closed. It
will take a few seconds before the
current core temperature appears again
in the display.
If you do not intend to use the wireless
probe, do not leave it in the oven while
cooking. Always put it in the storage
sleeve.