Installation Instructions Range To prevent accidents and damage to the range, you must read all instructions supplied before installing or using the appliance. en-US, CA M.-Nr.
PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY (a) Do not attempt to operate this oven with the door open since open-door operation can result in harmful exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks. (b) Do not place any object between the oven front face and the door or allow soil or cleaner residue to accumulate on sealing surfaces.
IMPORTANT SAFETY INSTRUCTIONS WARNING Children and adults can tip over the range if has not been secured. This may lead to fatal injuries. This range must be secured and connected using the anti-tip device according to the installation instructions. If you have moved the range, slide the locking latch onto the antitip device until you feel it lock into place. Do not use the range if the anti-tip device has not been properly installed and engaged.
IMPORTANT SAFETY INSTRUCTIONS WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury, or death. - Do not use or store gasoline or other combustible liquids or vapors in the vicinity of this or any other appliance. - WHAT TO DO IF YOU SMELL GAS – Do not try to light any appliance. – Do not touch any electric switches. – Do not use any phones inside your building.
Contents PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY ...................................................................................... 2 IMPORTANT SAFETY INSTRUCTIONS ............................................................ 3 IMPORTANT SAFETY INSTRUCTIONS ............................................................ 7 Notes on installation ......................................................................................... Data plate ..............................
Contents HR 1954-3 DF, HR 1955-3 DF, HR 1956-3 DF .................................................... Detailed views of HR 1954-3 DF ......................................................................... Detailed views of HR 1955-3 DF ......................................................................... Detailed views of HR 1956-3 DF ......................................................................... 81 84 88 92 Anti-tip device.................................................................
IMPORTANT SAFETY INSTRUCTIONS When using the appliance, follow basic safety precautions, including the following: Read all instructions before installation and use of the range to prevent accidents and machine damage. This range complies with current safety requirements. However, improper use of the appliance can result in personal injury or damage to property. Please read the installation instructions carefully before installing and connecting the appliance.
IMPORTANT SAFETY INSTRUCTIONS When using the appliance, follow basic safety precautions, including the following: Read all instructions before installation and use of the oven to prevent accidents and machine damage. WARNING - To reduce the risk of burns, electric shock, fire, injury to persons, or exposure to excessive microwave energy: This appliance complies with current safety requirements. Improper use of the appliance can lead to personal injury and material damage.
IMPORTANT SAFETY INSTRUCTIONS Risk of Fire! Do not use this oven to store or dry combustible materials. Persons who lack physical, sensory or mental abilities, or experience with the appliance should not use it without supervision or instruction by a responsible person. The oven compartment is equipped with special bulbs to cope with particular conditions (e.g., temperature, moisture, chemical resistance, abrasion resistance, and vibration).
IMPORTANT SAFETY INSTRUCTIONS Risk of injury caused by hot surfaces. Children’s skin is far more sensitive to high temperatures than that of adults. The oven gets much hotter during the Self Clean program than during normal use. Do not let children touch the oven during the Self Clean program. The cooktop gets hot when in use and remains hot for some time after being turned off. Keep children away from the appliance until it has cooled down and is no longer a burn hazard.
IMPORTANT SAFETY INSTRUCTIONS Temporary or permanent operation on an autonomous power supply system or a power supply system that is not synchronized with the grid power supply (e.g., island networks, back-up systems) is possible. A prerequisite for operation is that the power supply system complies with the specifications of EN 50160 or an equivalent standard.
IMPORTANT SAFETY INSTRUCTIONS During installation, maintenance and repair work, e.g. if the oven lighting is broken, the range must be completely disconnected from the power supply (see “Frequently asked questions”). The gas inlet valve must be closed. It is only completely isolated from the supply when: - The circuit breakers have been switched off, or - the fuses of the electrical installation have been completely removed, or - the plug (if present) is removed from the outlet.
IMPORTANT SAFETY INSTRUCTIONS Changes or modifications not expressly approved by Miele may void the user's authority to operate the oven. Danger of electric shock. If the cooktop is defective, immediately turn the appliance off and discontinue use. Disconnect it from the electricity and gas supply. Contact Customer Service.
IMPORTANT SAFETY INSTRUCTIONS Only clean parts listed in these operating and installation instructions. There is a delicate fiberglass seal around front of the oven compartment provide a seal for the glass on the inside of the oven door. This can be damaged by rubbing or scouring. If possible, refrain from cleaning this. Do not use oven cleaners. Do not use standard oven cleaners in the oven compartment or on the front of the oven. Never line the oven with oven liners.
IMPORTANT SAFETY INSTRUCTIONS The following applies to stainless steel surfaces: Adhesives will damage the coated stainless steel surface and cause it to lose its dirt-repellent protective coating. Do not use sticky notes, adhesive tape, or other types of adhesive on the stainless steel surface. Magnets can cause scratches. Do not use the stainless steel surface as a magnetic notice board. Accessories Only use original Miele accessories.
*INSTALLATION* Notes on installation The models described in these operating instructions can be found at the end. Data plate The data plate is located behind the toe kick panel. The toe kick panel is attached to the toe kick of the Range by magnets so it can be removed and put back again easily. There you can find the model number, serial number and the connection data (voltage/frequency/maximum rated load) for your Range.
*INSTALLATION* Notes on installation Disassembling the grill Danger of burning! Burners must be switched off. Make sure the cooktop has cooled down. To make cleaning easier, you can dismantle the grill. Reinstall by following these instructions in reverse order. Place the frame on the surface burner. The recess for the igniter is located on the right side in the lower quarter of the frame. Place the protective panel on the frame . Replace the grill .
*INSTALLATION* Notes on installation Optional accessories All Gas Range All accessories listed in these instructions are designed to be used with the Miele Range. Hot vapors are emitted above the island trim during Self Clean as well as when cooking food in the oven. The emission of vapors can soil and discolor surfaces above the island trim.
*INSTALLATION* Notes on installation Mounting the RBGAG All Gas Backguard 1 2 3 The rear of the Range must be accessible. Mount the backguard before installing the anti-tip device and connecting the Range. Undo the screws from the island trim. Pull back the island trim slightly until it can be removed. 1 2 2 a Backguard b Rear backguard panel c Interior panel To avoid scratching the backguard , place it front side downward on a soft surface (e.g., a blanket).
*INSTALLATION* Notes on installation 1 Secure the interior panel and the rear panel to the backguard with the screws supplied. Secure the backguard to the Range with the screws supplied. Backguard 12" (305 mm) 2 a Backguard b Range Push the backguard over the air duct extenders from above. As soon as the backguard is sitting on the Range, push the backguard backward.
*INSTALLATION* Notes on installation Mounting the Dual Fuel RBGDF Backguard The rear of the Range must be accessible. Mount the backguard before installing the anti-tip device and connecting the Range. Undo the screws from the island trim. Pull back the island trim slightly until it can be removed. Reinstall the backguard by following these instructions in reverse order. RBS Backsplash The backsplash is intended for installation to a Miele Range Hood (DAR model).
*INSTALLATION* Notes on installation Installation location This Range is not intended for outdoor use. Ranges with a plumbed water connection must not be installed in rooms where there is a risk of freezing temperatures. The floor of the space where the appliance is to be installed must be flat, level, and made of a strong, rigid material. The niche floor must be made of strong, rigid material.
*INSTALLATION* Notes on installation Range net weight The Range is heavy. Due to the size and weight of the appliance, installation should be performed by two people. Model Width Net weight incl. accessories HR 112x-3 AG HR 1421-3 E* HR 1622-3 i HR 1724-3 DF HR 192x-3 DF 29 15/16" approx. 307 lbs (140 kg) HR 113x-3 AG HR 193x-3 DF 35 15/16" HR 195x-3 DF 47 15/16" (762 mm) approx. 405 lbs (180 kg) (915 mm) approx.
*INSTALLATION* All Gas Range dimensions HR 1124-3 AG , , The shaded area represents the installation area for the connections: E = Electrical connection, G = Gas connection 24 No. Dimensions Description 13" (330 mm) Maximum depth of upper cabinet 18" (457 mm) Minimum safety distance to bottom edge of upper cabinet 35 1/2"–37" (901–940 mm) Distance from the floor to cooktop surface 10" (254 mm) Minimum safety distance to combustible surfaces.
*INSTALLATION* All Gas Range dimensions No. Dimensions Description min. 30" (762 mm) Niche width Please contact Miele Customer Service for more information. 37" (940 mm) Minimum safety distance between the top of the cooktop surface and the bottom of an unprotected combustible surface. 30" (762 mm) Minimum safety distance between the top of the cooktop surface and the bottom of the Miele Ventilation Hood (DAR model with DRxB XL or DRxB XXL blower).
*INSTALLATION* All Gas Range dimensions Detailed views of HR 1124-3 AG Side view of HR 1124-3 AG (x) = Depending on the appliance height adjustment: 5"–6 1/2" (127 mm–165.
*INSTALLATION* All Gas Range dimensions Detailed front side view of HR 1124-3 AG 27
*INSTALLATION* All Gas Range dimensions Front view of HR 1124-3 AG (x) = Depending on the appliance height adjustment: 5"–6 1/2" (127 mm–165.
*INSTALLATION* All Gas Range dimensions Rear view of HR 1124-3 AG G E = Electrical connection G = Gas connection 29
*INSTALLATION* All Gas Range dimensions HR 1134-3 AG, HR 1135-3 AG, HR 1136-3 AG , , The shaded area represents the installation area for the connections: E = Electrical connection, G = Gas connection 30 No. Dimensions Description 13" (330 mm) Maximum depth of upper cabinet 18" (457 mm) Minimum safety distance to bottom edge of upper cabinet 35 1/2"–37" (901–940 mm) Distance from the floor to cooktop surface 10" (254 mm) Minimum safety distance to combustible surfaces.
*INSTALLATION* All Gas Range dimensions No. Dimensions Description min. 36" (915 mm) Niche width Please contact Miele Customer Service for more information. 37" (940 mm) Minimum safety distance between the top of the cooktop surface and the bottom of an unprotected combustible surface. 30" (762 mm) Minimum safety distance between the top of the cooktop surface and the bottom of the Miele Ventilation Hood (DAR model with DRxB XL or DRxB XXL blower).
*INSTALLATION* All Gas Range dimensions Detailed views of HR 1134-3 AG Side view of HR 1134-3 AG (x) = Depending on the appliance height adjustment: 5"–6 1/2" (127 mm–165.
*INSTALLATION* All Gas Range dimensions Detailed front side view of HR 1134-3 AG 33
*INSTALLATION* All Gas Range dimensions Front view of HR 1134-3 AG (x) = Depending on the appliance height adjustment: 5"–6 1/2" (127 mm–165.
*INSTALLATION* All Gas Range dimensions Rear view of HR 1134-3 AG E = Electrical connection G = Gas connection 35
*INSTALLATION* All Gas Range dimensions Detailed views of HR 1135-3 AG Side view of HR 1135-3 AG (x) = Depending on the appliance height adjustment: 5"–6 1/2" (127 mm–165.
*INSTALLATION* All Gas Range dimensions Detailed front side view of HR 1135-3 AG 37
*INSTALLATION* All Gas Range dimensions Front view of HR 1135-3 AG (x) = Depending on the appliance height adjustment: 5"–6 1/2" (127 mm–165.
*INSTALLATION* All Gas Range dimensions Rear view of HR 1135-3 AG E = Electrical connection G = Gas connection 39
*INSTALLATION* All Gas Range dimensions Detailed views of HR 1136-3 AG Side view of HR 1136-3 AG (x) = Depending on the appliance height adjustment: 5"–6 1/2" (127 mm–165.
*INSTALLATION* All Gas Range dimensions Detailed front side view of HR 1136-3 AG 41
*INSTALLATION* All Gas Range dimensions Front view of HR 1136-3 AG (x) = Depending on the appliance height adjustment: 5"–6 1/2" (127 mm–165.
*INSTALLATION* All Gas Range dimensions Rear view of HR 1136-3 AG E = Electrical connection G = Gas connection 43
*INSTALLATION* All Electric Range dimensions HR 1421-3 E*, HR 1622-3 i , , The shaded area represents the installation area for the connections: E = Electrical connection, W = Plumbed water connection (HR 1622-3 i only) * Only available in Canada.
*INSTALLATION* All Electric Range dimensions No. Dimensions Description 13" (330 mm) Maximum depth of upper cabinet 18" (547 mm) Minimum safety distance to bottom edge of upper cabinet 35 1/2"–37" (901–940 mm) Distance from the floor to cooktop surface min. 30" (762 mm) 30" (762 mm) or 24" (609 mm) Niche width Minimum safety distance between the top of the cooktop surface and the bottom of an unprotected combustible surface.
*INSTALLATION* All Electric Range dimensions Detailed views of HR 1421-3 E Side view of HR 1421-3 E (x) = Depending on the appliance height adjustment: 5"–6 1/2" (127 mm–165.
*INSTALLATION* All Electric Range dimensions Detailed front side view of HR 1421-3 E 47
*INSTALLATION* All Electric Range dimensions Front view of HR 1421-3 E (x) = Depending on the appliance height adjustment: 5"–6 1/2" (127 mm–165.
*INSTALLATION* All Electric Range dimensions Rear view of HR 1421-3 E E = Electrical connection 49
*INSTALLATION* All Electric Range dimensions Detailed views of HR 1622-3 i Side view of HR 1622-3 i (x) = Depending on the appliance height adjustment: 5"–6 1/2" (127 mm–165.
*INSTALLATION* All Electric Range dimensions Detailed front side view of HR 1622-3 i 51
*INSTALLATION* All Electric Range dimensions Front view of HR 1622-3 i (x) = Depending on the appliance height adjustment: 5"–6 1/2" (127 mm–165.
*INSTALLATION* All Electric Range dimensions Rear view of HR 1622-3 i E = Electrical connection W = Plumbed water connection 53
*INSTALLATION* Dual Fuel Range dimensions HR 1724-3 DF , , The shaded area represents the installation area for the connections: E = Electrical connection, G = Gas connection 54 No. Dimensions Description 13" (330 mm) Maximum depth of upper cabinet 18" (457 mm) Minimum safety distance to bottom edge of upper cabinet 35 1/2"–37" (901–940 mm) Distance from the floor to cooktop surface 10" (254 mm) Minimum safety distance to combustible surfaces.
*INSTALLATION* Dual Fuel Range dimensions No. Dimensions Description min. 30" (762 mm) Niche width Please contact Miele Customer Service for more information. 37" (940 mm) Minimum safety distance between the top of the cooktop surface and the bottom of an unprotected combustible surface. 30" (762 mm) Minimum safety distance between the top of the cooktop surface and the bottom of the Miele Ventilation Hood (DAR model with DRxB XL or DRxB XXL blower).
*INSTALLATION* Dual Fuel Range dimensions Detailed views of HR 1724-3 DF Side view of HR 1724-3 DF (x) = Depending on the appliance height adjustment: 5"–6 1/2" (127 mm–165.
*INSTALLATION* Dual Fuel Range dimensions Detailed front side view of HR 1724-3 DF 57
*INSTALLATION* Dual Fuel Range dimensions Front view of HR 1724-3 DF (x) = Depending on the appliance height adjustment: 5"–6 1/2" (127 mm–165.
*INSTALLATION* Dual Fuel Range dimensions Rear view of HR 1724-3 DF G E = Electrical connection G = Gas connection 59
*INSTALLATION* Dual Fuel Range dimensions HR 1924-3 DF , , The shaded area represents the installation area for the connections: E = Electrical connection, W = Plumbed water connection, G = Gas connection 60 No. Dimensions Description 13" (330 mm) Maximum depth of upper cabinet 18" (457 mm) Minimum safety distance to bottom edge of upper cabinet 35 1/2"–37" (901–940 mm) Distance from the floor to cooktop surface 10" (254 mm) Minimum safety distance to combustible surfaces.
*INSTALLATION* Dual Fuel Range dimensions No. Dimensions Description min. 30" (762 mm) Niche width Please contact Miele Customer Service for more information. 37" (940 mm) Minimum safety distance between the top of the cooktop surface and the bottom of an unprotected combustible surface. 30" (762 mm) Minimum safety distance between the top of the cooktop surface and the bottom of the Miele Ventilation Hood (DAR model with DRxB XL or DRxB XXL blower).
*INSTALLATION* Dual Fuel Range dimensions Detailed views of HR 1924-3 DF Side view of HR 1924-3 DF (x) = Depending on the appliance height adjustment: 5"–6 1/2" (127 mm–165.
*INSTALLATION* Dual Fuel Range dimensions Detailed front side view of HR 1924-3 DF 63
*INSTALLATION* Dual Fuel Range dimensions Front view of HR 1924-3 DF (x) = Depending on the appliance height adjustment: 5"–6 1/2" (127 mm–165.
*INSTALLATION* Dual Fuel Range dimensions Rear view of HR 1924-3 DF E = Electrical connection W = Plumbed water connection G = Gas connection 65
*INSTALLATION* Dual Fuel Range dimensions HR 1934-3 DF, HR 1935-3 DF, HR 1936-3 DF , , The shaded area represents the installation area for the connections: E = Electrical connection, W = Plumbed water connection, G = Gas connection 66 No.
*INSTALLATION* Dual Fuel Range dimensions HR 1934-3 DF No. Dimensions Description min. 36" (915 mm) Niche width Please contact Miele Customer Service for more information. 37" (940 mm) Minimum safety distance between the top of the cooktop surface and the bottom of an unprotected combustible surface. 36" (915 mm) Minimum safety distance between the top of the cooktop surface and the bottom of the Miele Ventilation Hood (DAR model with DRxB XL blower).
*INSTALLATION* Dual Fuel Range dimensions HR 1935-3 DF, HR 1936-3 DF No. Dimensions Description min. 36" (915 mm) Niche width Please contact Miele Customer Service for more information. 37" (940 mm) Minimum safety distance between the top of the cooktop surface and the bottom of an unprotected combustible surface. 30" (762 mm) Minimum safety distance between the top of the cooktop surface and the bottom of the Miele Ventilation Hood (DAR model with DRxB XL or DRxB XXL blower).
*INSTALLATION* Dual Fuel Range dimensions Detailed views of HR 1934-3 DF Side view of HR 1934-3 DF (x) = Depending on the appliance height adjustment: 5"–6 1/2" (127 mm–165.
*INSTALLATION* Dual Fuel Range dimensions Detailed front side view of HR 1934-3 DF 70
*INSTALLATION* Dual Fuel Range dimensions Front view of HR 1934-3 DF (x) = Depending on the appliance height adjustment: 5"–6 1/2" (127 mm–165.
*INSTALLATION* Dual Fuel Range dimensions Rear view of HR 1934-3 DF E = Electrical connection W = Plumbed water connection G = Gas connection 72
*INSTALLATION* Dual Fuel Range dimensions Detailed views of HR 1935-3 DF Side view of HR 1935-3 DF (x) = Depending on the appliance height adjustment: 5"–6 1/2" (127 mm–165.
*INSTALLATION* Dual Fuel Range dimensions Detailed front side view of HR 1935-3 DF 74
*INSTALLATION* Dual Fuel Range dimensions Front view of HR 1935-3 DF (x) = Depending on the appliance height adjustment: 5"–6 1/2" (127 mm–165.
*INSTALLATION* Dual Fuel Range dimensions Rear view of HR 1935-3 DF E = Electrical connection W = Plumbed water connection G = Gas connection 76
*INSTALLATION* Dual Fuel Range dimensions Detailed views of HR 1936-3 DF Side view of HR 1936-3 DF (x) = Depending on the appliance height adjustment: 5"–6 1/2" (127 mm–165.
*INSTALLATION* Dual Fuel Range dimensions Detailed front side view of HR 1936-3 DF 78
*INSTALLATION* Dual Fuel Range dimensions Front view of HR 1936-3 DF (x) = Depending on the appliance height adjustment: 5"–6 1/2" (127 mm–165.
*INSTALLATION* Dual Fuel Range dimensions Rear view of HR 1936-3 DF E = Electrical connection W = Plumbed water connection G = Gas connection 80
*INSTALLATION* Dual Fuel Range dimensions HR 1954-3 DF, HR 1955-3 DF, HR 1956-3 DF , , The shaded area represents the installation area for the connections: E = Electrical connection, W = Plumbed water connection, G = Gas connection No.
*INSTALLATION* Dual Fuel Range dimensions HR 1954-3 DF No. Dimensions Description min. 48" (1,220 mm) Niche width Please contact Miele Customer Service for more information. 37" (940 mm) Minimum safety distance between the top of the cooktop surface and the bottom of an unprotected combustible surface. 36" (915 mm) Minimum safety distance between the top of the cooktop surface and the bottom of the Miele Ventilation Hood (DAR model with DRxB XXL blower).
*INSTALLATION* Dual Fuel Range dimensions HR 1955-3 DF, HR 1956-3 DF No. Dimensions Description min. 48" (1,220 mm) Niche width Please contact Miele Customer Service for more information. 37" (940 mm) Minimum safety distance between the top of the cooktop surface and the bottom of an unprotected combustible surface. 36" (915 mm) Minimum safety distance between the top of the cooktop surface and the bottom of the Miele Ventilation Hood (DAR model with DRxB XL blower).
*INSTALLATION* Dual Fuel Range dimensions Detailed views of HR 1954-3 DF Side view of HR 1954-3 DF (x) = Depending on the appliance height adjustment: 4"–5 1/2" (101.6 mm–139.
*INSTALLATION* Dual Fuel Range dimensions Detailed front side view of HR 1954-3 DF 85
*INSTALLATION* Dual Fuel Range dimensions Front view of HR 1954-3 DF (x) = Depending on the appliance height adjustment: 4"–5 1/2" (101.6 mm–139.
*INSTALLATION* Dual Fuel Range dimensions Rear view of HR 1954-3 DF E = Electrical connection W = Plumbed water connection G = Gas connection 87
*INSTALLATION* Dual Fuel Range dimensions Detailed views of HR 1955-3 DF Side view of HR 1955-3 DF (x) = Depending on the appliance height adjustment: 4"–5 1/2" (101.6 mm–139.
*INSTALLATION* Dual Fuel Range dimensions Detailed front side view of HR 1955-3 DF 89
*INSTALLATION* Dual Fuel Range dimensions Front view of HR 1955-3 DF (x) = Depending on the appliance height adjustment: 4"–5 1/2" (101.6 mm–139.
*INSTALLATION* Dual Fuel Range dimensions Rear view of HR 1955-3 DF E = Electrical connection W = Plumbed water connection G = Gas connection 91
*INSTALLATION* Dual Fuel Range dimensions Detailed views of HR 1956-3 DF Side view of HR 1956-3 DF (x) = Depending on the appliance height adjustment: 4"–5 1/2" (101.6 mm–139.
*INSTALLATION* Dual Fuel Range dimensions Detailed front side view of HR 1956-3 DF 93
*INSTALLATION* Dual Fuel Range dimensions Front view of HR 1956-3 DF (x) = Depending on the appliance height adjustment: 4"–5 1/2" (101.6 mm–139.
*INSTALLATION* Dual Fuel Range dimensions Rear view of HR 1956-3 DF E = Electrical connection W = Plumbed water connection G = Gas connection 95
*INSTALLATION* Anti-tip device Before installation WARNING Children and adults can tip over the range if has not been secured. This may lead to fatal injuries. Make sure that the anti-tip device is properly installed and locked into place. It should be screwed to the floor or wall and engage with the center of the bottom of the range. You must take care to protect the installed flooring when moving the range. After moving the range, make sure that the anti-tip device locks back into place.
*INSTALLATION* Anti-tip device Do not carry or lift the range by the oven door handle or the control panel! Checking the installation niche Install the anti-tip device on a surface capable of bearing significant weight, such as a concrete floor, concrete wall, or timber framing. The surface must be flat and level. If the rear of the Range has distance A to the supporting wall due to unevenness or wall covering (e.g., tile level), you must install the anti-tip device to the supporting floor.
*INSTALLATION* Anti-tip device Check the floor surface. Check the installation dimensions. Check the building drawings for supply wires and pipework. Make sure that you do not damage any wires or pipes when drilling holes to attach the anti-tip device. Check the position of the electrical, gas, and plumbed water connections (see “Electrical connection”, “Gas Connection”, and “Plumbed water connection”).
*INSTALLATION* Anti-tip device Mark the wall at the middle of the space width. Included accessories - 1 anti-tip device Position the notch of the anti-tip device on the wall marking. - 4 screws - 4 plugs The anti-tip device must fit tightly on the floor or the wall.
*INSTALLATION* Anti-tip device Using four screws , secure the antitip device to the floor surface with suitable bearing capacity, either to the floor or wall. Screw the locking nut to the bolt; see the “Installation dimensions of locking bolt” table. Do not push the Range into position before all supply connections have been established. The toe kick panel is attached to the toe kick of the Range by magnets. The locking clamp extends through the toe kick panel of the Range housing.
*INSTALLATION* Anti-tip device 3 2 1 2 3 a Opening in the Range housing a Locking clamp b Anti-tip device bolt b Rear adjustment c Locking clamp with slot c Front adjustment Align the Range. Slide the locking clamp firmly back. In the Range housing, there is an opening for the bolt of the anti-tip device. The opening allows the Range to be slid onto the anti-tip device and back to the wall.
Plumbed water connection Risk of injury and appliance damage if appliance is not connected properly. Failing to connect the appliance properly can result in personal injury and/or material damage. The appliance may only be connected to the plumbed water connection by qualified technicians. Risk to health and risk of damage due to contaminated water. The quality of the incoming water must conform to the requirements for drinking water in the country where the appliance is being used.
Plumbed water connection Connecting the appliance to the water supply line Make sure that the supply line is not kinked or damaged. Remove the water connection cover at the back of the appliance. Take the angled side of the brass fitting and check whether a gasket is present. If not, insert one. Screw the supply line coupling nut onto the threaded union. Ensure that the supply line is correctly fitted and that it is watertight.
*INSTALLATION* Electrical connection The plug must be inserted into a suitable outlet that has been installed and grounded in compliance with all applicable local regulations. WARNING: THIS APPLIANCE MUST BE GROUNDED Installer: Please pass these instructions on to the customer.
*INSTALLATION* Electrical connection Electrical connection Model HR 112x-3 AG Power cord NEMA For electrical supply with USA Canada 5–15 P plug 120 V 15 A 15 A 60 Hz HR 113x-3 AG approx. 5' 11" (1.80 m) HR 1421-3 E Only available in Canada. approx. 5' 11" (1.80 m) 14–50 P plug 120/208 V or 120/240 V 50 A 50 A 60 Hz HR 1622-3 i approx. 5' 11" (1.80 m) 14–50 P plug 120/208 V or 120/240 V 50 A 50 A 60 Hz HR 172x-3 DF approx. 5' 11" (1.
*INSTALLATION* Electrical connection Data plate The data plate is located behind the toe kick panel. The toe kick panel is attached to the toe kick of the Range by magnets so it can be removed and put back again easily. There you can find the model number, serial number and the connection data (voltage/frequency/maximum rated load) for your Range. Have this information available if you need to contact Miele so that any issues can be rectified as quickly as possible.
*INSTALLATION* Gas connection Connection to the gas supply should only be undertaken by an approved and registered gas installer. In Massachusetts, the gas connection may be performed only by a certified gas installer. The Range must be connected with its own faucet. The gas connection must be installed so that connection can be made either from inside or outside the kitchen unit. The faucet must be easily accessible and visible (by opening the door panel if necessary).
*INSTALLATION* Gas connection The installation must comply with local regulations or, if there are no local regulations, the National Fuel Gas Code, ANSI Z223.1/NFPA 54. The gas pressure may not undershoot or exceed certain values. Make sure that the maximum gas pressure upstream of the gas pressure controller does not amount to more than 1/2 psi (3.5 kPA) for natural gas NG and liquid propane LP.
*INSTALLATION* Burner ratings Burner ratings HR 1124-3 AG Natural gas NG Btu/hr kW Simmer burner 12,500 3.7 Power burner 19,500 5.7 Browning burner 22,000 6.4 Bake burner 23,200 6.8 Total cooktop output 71,000 20.8 Maximum total output of Range 94,200 27.6 Liquid propane LP Btu/hr kW Simmer burner 12,500 3.7 Power burner 19,500 5.7 Browning burner 20,150 5.9 Bake burner 23,200 6.8 Total cooktop output 71,000 20.8 Maximum total output of Range 94,200 27.
*INSTALLATION* Burner ratings Burner ratings HR 1134-3 AG Natural gas NG Btu/hr kW Simmer burner 8,000 2.3 Power burner, rear 9,000 2.6 Power burner, front 19,500 5.7 Browning burner 22,000 6.4 Bake burner 25,500 7.5 Total cooktop output 84,500 24.8 Maximum total output of Range 110,000 32.2 Liquid propane LP Btu/hr kW Simmer burner 8,000 2.3 Power burner, rear 9,000 2.6 Power burner, front 19,500 5.7 Browning burner 20,150 5.9 Bake burner 27,500 8.
*INSTALLATION* Burner ratings Burner ratings HR 1136-3 AG Natural gas NG Btu/hr kW Simmer burner 8,000 2.3 Power burner, rear 9,000 2.6 Power burner, front 19,500 5.7 Griddle plate 13,000 3.8 Browning burner 22,000 6.4 Bake burner 25,500 7.5 Total cooktop output 69,000 20.2 Maximum total output of Range 94,500 27.7 Liquid propane LP Btu/hr kW Simmer burner 8,000 2.3 Power burner, rear 9,000 2.6 Power burner, front 19,500 5.7 Griddle plate 13,000 3.
*INSTALLATION* Burner ratings Burner ratings HR 1724-3 DF Natural gas NG Btu/hr kW Simmer burner 12,500 3.7 Power burner 19,500 5.7 Total cooktop output 71,000 20.8 Liquid propane LP Btu/hr kW Simmer burner 12,500 3.7 Power burner 19,500 5.7 Total cooktop output 71,000 20.8 Natural gas NG Btu/hr kW Simmer burner 12,500 3.7 Power burner 19,500 5.7 Total cooktop output 71,000 20.8 Liquid propane LP Btu/hr kW Simmer burner 12,500 3.7 Power burner 19,500 5.
*INSTALLATION* Burner ratings Burner ratings HR 1934-3 DF Natural gas NG Btu/hr kW Simmer burner 12,500 3.7 Power burner, rear 13,600 4.0 Power burner, front 19,500 5.7 Total cooktop output 98,200 28.8 Liquid propane LP Btu/hr kW Simmer burner 12,500 3.7 Power burner, rear 13,000 3.8 Power burner, front 19,500 5.7 Total cooktop output 97,000 28.4 Natural gas NG Btu/hr kW Simmer burner 12,500 3.7 Power burner, rear 13,600 4.0 Power burner, front 19,500 5.
*INSTALLATION* Burner ratings Burner ratings HR 1936-3 DF Natural gas NG Btu/hr kW Simmer burner 12,500 3.7 Power burner, rear 13,600 4.0 Power burner, front 19,500 5.7 Griddle plate 13,000 3.8 Total cooktop output 78,100 22.9 Liquid propane LP Btu/hr kW Simmer burner 12,500 3.7 Power burner, rear 13,000 3.8 Power burner, front 19,500 5.7 Griddle plate 13,000 3.8 Total cooktop output 77,500 22.
*INSTALLATION* Burner ratings Burner ratings HR 1954-3 DF Natural gas NG Btu/hr kW Simmer burner 10,000 2.9 Power burner, rear 13,600 4.0 Power burner, front 19,500 5.7 Total cooktop output 125,200 36.7 Liquid propane LP Btu/hr kW Simmer burner 10,000 2.9 Power burner, rear 13,000 3.8 Power burner, front 19,500 5.7 Total cooktop output 124,000 36.3 Natural gas NG Btu/hr kW Simmer burner 10,000 2.9 Power burner, rear 13,600 4.0 Power burner, front 19,500 5.
*INSTALLATION* Burner ratings Burner ratings HR 1956-3 DF Natural gas NG Btu/hr kW Simmer burner 10,000 2.9 Power burner, rear 13,600 4.0 Power burner, front 19,500 5.7 Griddle plate 13,000 3.8 Total cooktop output 105,100 30.8 Liquid propane LP Btu/hr kW Simmer burner 10,000 2.9 Power burner, rear 13,000 3.8 Power burner, front 19,500 5.7 Griddle plate 13,000 3.8 Total cooktop output 104,500 30.
Customer Service Contact in the event of a fault In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or Miele Customer Service. You can book a Miele Service Call online at www.miele.com/service. Appliance warranty and product registration You can register your product and/or view the manufacturer´s warranty terms and conditions for Miele appliances and vacuum cleaners at www.mieleusa.com.
Caring for the environment Disposal of the packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of your old appliance Electrical and electronic appliances contain valuable materials.
Copyrights and licenses For the purpose of operating and controlling the communication module, Miele uses proprietary or third-party software that is not covered by open source licensing terms. This software/these software components are protected by copyright. The copyrights held by Miele and third parties must be respected. In addition, the integrated communication module contains software components which are distributed under open source licensing terms.
Deutschland: Miele & Cie. KG Carl-Miele-Straße 29 33332 Gütersloh Telefon: 0800 22 44 666 (kostenfrei) Mo-Fr 8-20 Uhr Sa+So 9-20 Uhr Telefax: 05241 89-2090 Miele im Internet: www.miele.de E-Mail: info@miele.de Österreich: Miele Gesellschaft m.b.H. Mielestraße 1 5071 Wals bei Salzburg Telefon: 050 800 800 (Festnetz zum Ortstarif; Mobilfunkgebühren abweichend) Mo-Fr 8-17 Uhr Telefax: 050 800 81219 Miele im Internet: www.miele.at E-Mail: info@miele.at Luxemburg: Miele S.à.r.l.
HR 1421-3 E, HR 1622-3 i, HR 1124-3 AG, HR 1134-3 AG, HR 1135-3 AG, HR 1136-3 AG, HR 1724-3 DF, HR 1924-3 DF, HR 1934-3 DF, HR 1935-3 DF, HR 1936-3 DF, HR 1954-3 DF, HR 1955-3 DF, HR 1956-3 DF en-US, CA M.-Nr.
