Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the range
- Controls for the range
- Using the appliance
- Features
- Data plate
- Scope of delivery
- Standard and optional accessories
- Side racks
- Universal tray and wire oven rack with anti-tip safety notches
- FlexiClip telescopic runners HFC 92
- Installing and removing the FlexiClip telescopic runners
- Round baking pans
- Perforated Gourmet Baking Tray HBBL 71
- Broiling and roasting insert HGBB 30-1
- HUB Gourmet Casserole Dishes HBD Gourmet Casserole Dish lids
- Wireless precision probe
- Accessories for cleaning and care
- Gas cooktop safety features
- Oven safety features
- PerfectClean treated surfaces
- Self-Clean-ready accessories
- Before first use
- Using the gas cooktop
- Using the oven
- Settings
- Settings overview
- Opening the “ Settings ” menu
- Language
- Time
- Date
- Lighting
- Start screen
- Display
- Volume
- Units of Measurement
- Booster
- Recommended temperatures
- Self clean
- Cooling fan run-on
- Proximity sensor ( MotionReact )
- Safety
- Miele@home
- Remote Control
- SuperVision
- RemoteUpdate
- Lift-up panel
- Electrical version
- Probe
- Calibrate temperature
- Software version
- Legal information
- Showroom Program
- Factory default
- Alarm + Timer
- Main and submenus
- Moisture Plus
- Automatic Programs
- Special Modes
- MyMiele
- Favorites
- Baking
- Roasting
- Broiling
- Gas cooktop cleaning and care
- Cleaning and care of the oven
- Frequently Asked Questions
- Customer Service
- Caring for the environment
- Declaration of conformity
- Copyrights and licenses
Frequently Asked Questions
Problem Possible cause and solution
The ignitor does not
function properly.
The breaker in the building’s wiring system has
tripped.
Contact a qualified electrician or Miele Customer
Service if necessary.
There is food residue stuck between the ignitor and
the burner cap.
Remove any soiling (See “Gas cooktop cleaning
and care”).
Grill and griddle plate
switch off/cannot be
switched on
The grill and griddle plate will be switched off as
soon as you start the Self Clean program on the
oven.
This is not a fault. This has triggered the safety shut-
off.
Turn the control knob for the grill and griddle plate
to Off. As soon as the Self Clean program has
finished, you can switch the grill and griddle plate
back on again.
The grill and griddle plate cannot be turned on while
the Self Clean program is running on the oven.
This is not a fault. This has triggered the safety shut-
off.
Turn the control knob for the grill and griddle plate
to Off. As soon as the Self Clean program has
finished, you can switch the grill and griddle plate
back on again.
Grill and griddle plate
cannot be switched
back on immediately af-
ter switching off
The appliance performs a safety check before the
ignitor ignites.
This is not a fault. After a few seconds, the ignitor will
“click” and ignite the gas.
Push in the control knob for the grill or griddle
plate and turn it counterclockwise to High until the
burner ignites.
With cooktops using LP
gas a buzzing noise can
be heard during the
heating-up phase.
This is not a fault. The noise will cease after a few
seconds.
117