Speed Oven and Warming Drawer Operating Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the range
- Control panel
- Using the appliance
- Features
- Before first use
- Operating the drawer
- Using the oven
- Settings
- Settings overview
- Opening the “ Settings ” menu
- Language
- Time
- Date
- Lighting
- Start screen
- Display
- Volume
- Units of Measurement
- Quick Microwave
- Popcorn
- Booster
- Recommended temperatures
- Recommended power levels
- Cooling fan run-on
- Proximity sensor ( MotionReact )
- Safety
- Miele@home
- Remote Control
- SuperVision
- RemoteUpdate
- Lift-up panel
- Electrical version
- Calibrate temperature
- Software version
- Legal information
- Showroom Program
- Factory default
- Alarm + Timer
- Main and submenus
- Microwave operation
- Quick Microwave
- Automatic Programs
- Special Modes
- MyMiele
- Favorites
- Baking
- Roasting
- Broiling
- Cleaning and care of the drawer
- Cleaning and care of the oven
- Frequently Asked Questions
- Customer Service
- Caring for the environment
- Declaration of conformity
- Copyrights and licenses
Special Modes
99
Using the Slow RoastingSpecial
Mode
Observe the information under
“Roasting – Precision Probe”.
Select Special Modes.
Select Slow Roasting.
Follow the instructions on the display.
Place the necessary accessories in
the oven compartment for the
preheating phase.
Set the temperature and the core
temperature.
While the oven is preheating, sear the
meat on all sides on the cooktop.
Danger of burning due to hot
surfaces.
The oven gets hot during operation.
You could burn yourself on the
heating elements, oven
compartment, or accessories.
When the oven is hot, use pot
holders to insert, remove, or turn
food, as well as when adjusting the
oven shelves, etc.
Once Insert the probe and place food in
the oven appears on the display, place
the seared meat on the wire rack and
insert the probe so that the metal tip
is fully in the center of the meat.
Close the door.
At the end of the program, Readywill
appear on the display and an audible
signal will sound.
Using the Surroundoperating mode
Use the glass tray with the wire rack
placed on top of it.
Turn off the Boosterfunction for the
preheating phase.
Place the glass tray with a wire rack
on shelf level1.
Select Operating Modes.
Select the Surroundoperating
mode and a temperature of 210°F
(100°C).
Turn off the Boosterfunction via the
pull-down menu.
Preheat the oven with the glass tray
and the wire rack inside for approx.
15minutes.
While the oven is preheating, sear the
meat on all sides on the cooktop.
Danger of burning due to hot
surfaces.
The oven gets hot during operation.
You could burn yourself on the
heater elements, oven cavity, or
accessories.
Use pot holders when placing food
in the appliance or removing it and
when working in the hot oven cavity.
Place the seared meat on the wire
rack.
Reduce the temperature to 195°F
(90°C).
Continue cooking the meat until it is
done.