Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Winter setting
- Storing food in the refrigerator section
- Adjusting the interior fittings
- Freezing and storing food (depending on model)
- Defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- Installation
Installation
*INSTALLATION*
50
Unscrew the upper hinge pin with
the hexagon key supplied and refit it
on the opposite side. Don’t forget to
use the washer.
Fit the appliance door from below up
onto the upper hinge pin and then
close the appliance door.
Fit the hinge bracket from below
into the lower door bearing and screw
it on tight.
The appliance door can be aligned
using the long slots in the hinge
bracket. Ensure that all screws have
been properly tightened.
Changing the hinging of the freezer
compartment door
Open the freezer compartment door
.
Flip the cover on bearing block
down.
Unscrew bearing block and take
off the freezer compartment door
together with the bearing block.
Unscrew door catch.