Operating instructions/Installation instructions
Problem solving guide
39
The interior lighting is not working.
Problem Cause and remedy
The interior lighting is
not working.
The appliance has not been switched on or the light
contact switch is stuck.
Turn the temperature selector to a setting between
1 and 7 or check the light contact switch.
If this is not the cause of the fault, exchange the LED
lighting lamp.
Exchanging the LED lighting lamp
Risk of injury from LED lighting.
This lighting corresponds to risk group RG2. If the cover is defective, there is a
danger of eye injury.
If the lighting cover is defective, do not look from a close range directly into the
lighting with optical instruments (e.g. magnifying glass or similar).
Switch off at the wall socket and withdraw the plug from the socket, or discon-
nect the fuse.
Reach the back of the lamp cover, press up at the sides, and pull the lamp
cover off.
Risk of fire and damage from LED lighting lamp.
There is a risk of overheating if other LED lighting lamps are fitted.
Only use a genuine Miele original LED lighting lamp. LED lighting lamps are
available from your Miele dealer or the Miele Customer Service Department.
Fit the new LED lamp.
The following lamps, available from the Miele Customer Service Department, are
suitable: 220–240V, max. 15W, E14.
Push the lamp cover back into place.