Operating instructions/Installation instructions
Installation
*INSTALLATION*
51
Screw door catch into place on the
opposite side, having turned it by
180°C.
Plug the holes with stoppers sup-
plied.
Fit bearing block together with
freezer compartment door in posi-
tion at the top, then tighten bear-
ing block securely.
Flip the cover on bearing block
back up.
Changing over the door handle
Carefully remove the cap and
stoppers from the sides.
Be careful not to let the tool slip out
and damage the appliance surface.
Slide the cover over to the left and
then insert a suitable plastic or
wooden tool into the gap on the
right hand side.
Carefully lever the cover off.