Operation Manual
Table Of Contents
- Contents
- Description of the appliance 5
- Caring for the environment 7
- Warning and Safety instructions 8
- How to save energy 16
- Switching on and off 18
- The correct temperature 22
- Temperature and door alarm 25
- Super cool 27
- Storing food in the refrigerator section 28
- Storing food in the MasterFresh zone 31
- Arranging the interior fittings 34
- Automatic defrost 37
- Cleaning and care 38
- Problem solving guide 41
- Noises 44
- After Sales / Guarantee 45
- Note for test institutes 46
- Electrical connection 47
- Installation advice 48
- Building-in dimensions 54
- Installation 56
- Tools and accessories required 56
- Weight of the door front 57
- Building into a peninsular run 57
- Building-in at the end of a run of units 57
- Aligning the building-in niche 58
- Checking the building-in niche 58
- Before installation 58
- Preparing the niche 59
- Placing the appliance in the niche 63
- Aligning the appliance 64
- Securing the appliance in the niche 65
- Preparing the furniture front 67
- Securing and aligning the furniture door 69
- Securing the covers 70
- Fitting the plinth facing 71
- Fitting the air separator 72
- Addresses 75
Disposal of the packing
material
The packaging is designed to protect
the appliance from damage during
transportation. The packaging materials
used are selected from materials which
are environmentally friendly for disposal
and should be recycled.
Recycling the packaging reduces the
use of raw materials in the
manufacturing process and also
reduces the amount of waste in landfill
sites.
Disposal of your old appliance
Electrical and electronic appliances
often contain valuable materials. They
also contain materials which, if handled
or disposed of incorrectly, could be
potentially hazardous to human health
and to the environment. They are,
however, essential for the correct
functioning of your appliance. Please
do not therefore dispose of it with your
household waste.
Please dispose of it at your local
community waste collection / recycling
centre or contact your dealer for
advice. Ensure that it presents no
danger to children while being stored
for disposal.
Take care not to damage the pipework
at the back of it before or during
transportation to an authorised
collection depot.
In this way, refrigerant in the pipework
and oil in the compressor will be
contained, and will not leak out into the
environment.
Caring for the environment
7