Operating instructions/Installation instructions

Installation
*INSTALLATION*
28
 When performing the individual as-
sembly steps, observe the letters
specified and use the matching
plastic bag with the required installa-
tion equipment.
The anti-tip brackets prevent the refri-
geration appliance from tipping.
The anti-tip brackets are also used to fix
the building-in niche securely to the
surrounding walls.
 Use 2 anti-tip brackets for each in-
dividual refrigeration appliance or 4
anti-tip brackets for each (side-by-
side) combination of 2 appliances.
 Position the anti-tip brackets on
the left and right of the building-in
niche.
Depending on the subsequent adjust-
ment of the feet, the anti-tip brackets
are positioned 2134–2164mm from
the floor of the niche.
 Risk of injury and damage due to
tipping refrigeration appliance.
If the anti-tip brackets are fixed too
high up, they cannot be used to se-
cure the refrigeration appliance.
The distance between the
anti-tip brackets and the refrigeration
appliance must not exceed 8mm.
 Make sure that the gap between the
refrigeration appliance‘s rear wall and
the building-in niche does not exceed
51mm.
 Place a wooden wedge behind the
anti-tip brackets if necessary.