Operating instructions/Installation instructions

Problem solving guide
40
Display warnings
Message Cause and remedy
DEMO lights up in the
display, the appliance
does not get cold, al-
though the appliance
controls are working.
Demo mode is switched on. This allows the appli-
ance to be presented in the showroom without the
cooling system being switched on. Do not activate
this setting for domestic use.
 Call Service.
is lit up in the display
and the appliance can-
not be used.
The safety lock has been activated.
 Deactivate the lock (see “Selecting further settings
- Activating or deactivating the lock”).
“F0toF9” appears in
the display.
There is a fault.
 Call the Miele Service Department.