Operating instructions/Installation instructions

Installation
*INSTALLATION*
53
Changing the handle over
 Take stoppers out of the door
bearings in the appliance door.
 Remove stopper from the top of
the door and refit it on the opposite
side of the door.
 Remove covers from handle,
then unscrew the handle and refit all
these parts on the opposite side of
the door.
 Take care when refitting covers 
that they click into position correctly.
 Refit stoppers on the opposite side
of the door.
 To change over the spring clamp 
press down on the catch and pull the
spring clamp forwards:
Changing the lower hinge plate over
 Pull hinge pin complete with
washer  and adjusting foot  up-
wards to remove.
 Remove stopper.
 Undo the screws  and remove the
hinge plate .
 Loosen the screw for the door closing
aid  in hinge plate . Refit the door
closing aid  in the hole on the other
side of the hinge plate and then
tighten the screw up again.
 Insert stopper into the other hole.
 Remove cover .