Operating instructions/Installation instructions

Installation
*INSTALLATION*
54
 Take screw out and screw it into
the outside hole on the opposite side.
 Turn cover through 180° and refit it
on the opposite side.
 Screw hinge plate  securely into
position on the new hinge side.
 Refit the entire hinge pin , including
the washer  and adjustable foot .
Important! The tab on the hinge pin
must still face downwards.
 Place door onto the hinge pin from
above.
 Close the appliance door.
Inserting the upper hinge plate
 Fit hinge plate  on the opposite
side and secure it with screws. If
necessary drill pilot holes for the
screws or use a battery operated
screwdriver.
 Replace covers and on the op-
posite side.
 Align the door with the appliance
housing using the long slots in the
lower hinge plate. Then tighten the
screws.