Operating and Installation instructions

Selecting additional settings
68
Switching on the Door
Assistant
You can choose between the two Door
Assistants Push2Open and Pull2Open.
The default Door Assistant is
Push2Open.
The Push2Open Door Assistant is
suitable for cabinet fronts without
handles. The door will then open
automatically when you gently press
against it.
The Pull2Open Door Assistant is suitable
for cabinet fronts with handles. The
appliance door can be opened easily
with little force.
 Risk of damage if the appliance
door is closed prematurely.
When the Door Assistant is switched
on, repeatedly closing the appliance
door early can lead to damage or
malfunctions.
Refrain from holding onto or closing
the appliance door while automatic
door opening is still extended. If you
have indeed closed the appliance
door, leave it closed for 5minutes.
Automatic door opening resets itself.
Switching on Push2Open
 In Settings mode, use the and
sensor controls to select Door
Assistant and select OK to confirm
your selection.
 Use the and sensor controls to
select Mode and select OK to confirm
your selection.
 Use the and sensor controls to
select Push2Open and select OK to
confirm your selection.
 Touch the sensor control to return
to the previous menu level.
– Adjusting the intensity
You can also adjust the intensity of the
Push2Open function. The lower the set
intensity, the less force required when
you push against the appliance door.
 In Settings mode, use the and
sensor controls to select Door
Assistant and select OK to confirm
your selection.
 In Settings mode, use the and
sensor controls to select Intensity
and select OK to confirm your
selection.
 Use the and sensor controls to
select the right intensity (Low, Medium,
High) and select OK to confirm your
selection.